Abstract--In this investigation, the fracture surfaces of SS 304 and SS 316 austenitic steels were analysed using the X-ray fractography technique. In both cases, a decrease in the austenite content was observed at the fracture surface as a result of deformation induced martensite, indicating a linear relation with Km~ within the stable crack growth region. The presence of this martensite was f...

A new experimental approach is used to quantify the full field heterogeneous strain accommodation associated with martensitic phase transformation in Nickel–Titanium at the microstructural length scale. Local deformation measures were matched with underlying microstructural characteristics obtained by EBSD, providing point-by-point correlation between transformation extent and microstructure. I...

The local plasticity and associated microstructure evolution in Fe-5Mn-0.1C medium-Mn steel (wt.%) were investigated this study. Specifically, the micro-deformation mechanism during Lüders banding was characterized based on multi-scale electron backscatter diffraction measurements channeling contrast imaging. Similar to other steels, showed discontinuous macroscopic deformation, preferential pl...

Due to recent concern about allergic and toxic effects of Ni ions released from TiNi alloy into human body, much attention has been focused on the development of new Ni-free, metastable beta-type biomedical titanium alloys with a reversible phase transformation between the beta phase and the alpha'' martensite. This study investigates the effect of the stress-induced alpha'' martensite on the m...

The stress-induced transformation behavior of retained austenite is considered in this work. With the development of transformationinduced plasticity (TRIP) steels this deformation mode is of growing importance. Twinned martensite structures were calculated using the crystallographic theory of martensite. An available work criterion was used to predict the transformation potentials for 16 diffe...

Nano/submicron austenitic stainless steels have attracted increasing attention over the past few years due to fine structural control for tailoring engineering properties. At the nano/submicron grain scales, grain boundary strengthening can be significant, while ductility remains attractive. To achieve a nano/ submicron grain size, metastable austenitic stainless steels are heavily cold-worked,...

The influence of the free surface on martensitic transformation was examined by comparing the highest temperature at which martensite forms (MS), as measured using dilatometry, with surface–observations using confocal laser scanning microscopy. It is found that the proximity of the surface during confocal microscopy permits martensitic transformation to occur at a higher temperature, with a red...

Coarse crystals of martensite can form by the coalescence of thin individual platelets of martensite under appropriate circumstances. Although these coarse grains are essentially single crystals, there exist significant orientation gradients across their dimensions. It is demonstrated that these gradients arise because of the plasticity induced in austenite due to the transformation strain asso...