The mechanical properties of engineering materials are key for ensuring safety and reliability. However, the plastic deformation of BMGs is confined to narrow regions in shear bands, which usually result in limited ductilities and catastrophic failures at low homologous temperatures. The quasi-brittle failure and lack of tensile ductility undercut the potential applications of BMGs. In this rep...

High-entropy alloys (HEAs) can have either high strength or high ductility, and a simultaneous achievement of both still constitutes a tough challenge. The inferior castability and compositional segregation of HEAs are also obstacles for their technological applications. To tackle these problems, here we proposed a novel strategy to design HEAs using the eutectic alloy concept, i.e. to achieve ...

Intermetallic compounds are increasingly being expected to be utilized in tribological environments, but to date their implementation is hindered by insufficient ductility at low and medium temperatures. This paper presents a novel multiphase intermetallic alloy with the chemical composition of Mo-40Ni-13Si (at %). Microstructure characterization reveals that a certain amount of ductile Mo phas...

Damage tolerance can be an elusive characteristic of structural materials requiring both high strength and ductility, properties that are often mutually exclusive. High-entropy alloys are of interest in this regard. Specifically, the single-phase CrMnFeCoNi alloy displays tensile strength levels of ∼ 1 GPa, excellent ductility (∼ 60-70%) and exceptional fracture toughness (KJIc>200 MPa√m). Here...

When an extreme earthquake occurs, it is essential to detect the severe structural damage that affect the structural safety immediately. This paper proposes a method for quick earthquake damage detection/evaluation of reinforced concrete bridge columns. An intelligent sensor unit is developed that captures changes in the natural period of a bridge column by FFT of response acceleration recorded...

The AASHTO code of practice for design of bridges shows that the ductility level for foundation is given equal to one. Bridges are classified in three classes. For class of essential and normal bridges a question for not to use ductility level due to the importance of bridges’ costs is become an important item in different countries particularly in Middle east. This paper aimed to study on pe...

The plastic stability and ductile rupture under evolution of cavity-damage and local strength inhomogeneities are examined theoretically for uniaxial tension. Analytical solutions are derived for that arbitrary strain-induced formations modified to stress-triaxiality evolution during necking. With increasing rate of damage formation necking is enhanced and ductility as well as load drop reduces...

The effects of a third element, namely silver, copper, zinc, or antimony, on the microstructure and mechanical properties of eutectic tin-bismuth (Sn–Bi) solder were investigated. The investigation showed that, except for zinc, the addition of a trace amount of the third element improves the ductility of the Sn–Bi solder owing to the formation of a fine, homogeneous ternary eutectic microstruct...

Nanocrystalline Ni-W alloys having both high ductility and high strength were produced by electrodeoisition. The plating bath for the electrodeposition contained nickel sulfate, citric acid, sodium tungstate and ammonium chloride, and was operated at various bath concentrations and conditions of electrolysis. The ductility and tensile strength of the deposited alloys are strongly influenced by ...

All the existing loading protocols have been developed independently of the value of the behaviour factor q that the structure has been designed for. Conservatively, a single loading protocol is adopted, for all q values, based on the structural system with the most onerous cumulative seismic demands. However, analyses conducted by the authors, show that imposed cumulative seismic demands decre...