The formation and removal of the carbonaceous deposits formed by n-butane and liquid hydrocarbons, such as n-decane and proprietary light and heavy naphthas, between 973 and 1073 K on YSZ and ceria-YSZ, has been studied to determine conditions for stable operation of direct-utilization SOFC. First, it is shown that deactivation of SOFC with Cu-ceria-YSZ anodes operating on undiluted n-decane, a...

Powders consisting of ferromagnetic (FM) Fe nanoparticles, of about 7 nm in size, embedded in an antiferromagnetic (AFM) Cr2O3 matrix have been obtained by high-temperature reduction under a hydrogen atmosphere of a mixed Cr–Fe oxide. This FM–AFM system exhibits exchange bias effects, i.e. a loop shift (HE) and coercivity enhancement ( HC), when field-cooled through the Néel temperature, TN, of...

Powders consisting of ferromagnetic (FM) Fe nanoparticles, of about 7 nm in size, embedded in an antiferromagnetic (AFM) Cr2O3 matrix have been obtained by high-temperature reduction under a hydrogen atmosphere of a mixed Cr–Fe oxide. This FM–AFM system exhibits exchange bias effects, i.e. a loop shift (HE) and coercivity enhancement ( HC), when field-cooled through the Néel temperature, TN, of...

Yttria stabilized zirconia (YSZ) has been widely used as electrolyte in solid oxide fuel cell (SOFC). The effect of fabrication process on the properties of YSZ electrolyte thick film is discussed in the paper. With YSZ nano-powders of about 20-60nm as raw material, YSZ green adobe was fabricated by tape calendering process. Three-step sintering process was performed firstly holding at 1000°C f...

During the last three decades, a large number of investigations has been reported pertaining to the science and technology of solid oxide fuel cells (SOFCs) based mainly on the yttria-stabilized zirconia (YSZ) electrolyte. Because of the problems associated with the high temperature of operation ( ,-~ 1 000 ~ of the YSZ-based cells, there has been a substantial effort to develop alternative ele...

Mixtures of WO3 and Cr2O3 in varying weight ratios as well as adjacent alignment of these two powders were both examined as possible designs for NO-selective sensor. Studies focused on resistance measurements toward NO and CO at 300 ◦C were carried out. Using the sensor design with the adjacent alignment of n-type WO3 and p-type Cr2O3 resulted in optimal performance. This sensor design exploits...

Novel strategies based on spray-pyrolysis deposition are proposed to increase the triple-phase boundary (TPB) of La0.8Sr0.2MnO3-δ (LSM) cathodes in contact with yttria-stabilized zirconia (YSZ) electrolyte: (i) nanocrystalline LSM films deposited on as-prepared YSZ surface; (ii) the addition of poly(methyl methacrylate) microspheres as pore formers to further increase the porosity of the film c...

the present research aims to synthesize the ha/ysz composite and to formulate ha/ysz-gic for improving the fluoride release of the set cement. experiments were performed by mixture design (md) method, and data analysis was carried out by mini- tab 14 software. the results showed that the combination of 25.891wt.% ha, 70.246wt.% zro2 and 3.86wt.% y2o3 has desirable fluoride release profile. comb...

Tubular solid oxide fuel cells were fabricated and evaluated for their microstructure and electrochemical performance. The tubular substrate was prepared by casting NiO-Y2O3 stabilized ZrO2 (YSZ) slurry on the inner wall of a plastic mold (tube). The wall thickness and uniformity were controlled by slurry viscosity and rotation speed of the tube. The cells consisted of Ni-YSZ functional anode, ...