Delamination is one of the most common failure modes in composite structures. In the case of in-plane compressional loading, delamination of a layered flat structure can cause a local buckling in delaminated area which subsequently affects the overall stiffness of the initial structure. This leads to an early failure of the overall structure. Moreover, with an increase in load, the delaminated ...

ABSTRACT: The mechanical parameters of constitutive equations for soil and rock can be determined by laboratory experiments in which a cylindrical specimen is commonly tested under uniaxial and triaxial compressive conditions. The distribution of stress in the specimen during the tests must be kept uniform and homogeneous. In this paper, numerical simulations are carried out to determine the di...

This paper reports on a proposed novel 3D-printed sandwich lattice model using triply periodic minimal surface (TPMS) structure for meta-functional composite bridge bearings (MFCBBs). It could be implemented in systems, including buildings and railway bridges. A TMPS offers high performance to density ratio under different loading. Compared typical elastomeric with any reinforcements, the use o...

The aim of this study was to investigate the effects of serum and compressive dynamic loading on the cartilaginous matrix spatiotemporal distribution around chondrocytes in vitro. Murine chondrocytes suspended in agarose were cultured in serum-free media or in varying concentrations of serum with or without compressive dynamic loading. Gene expression was assayed by quantitative polymerase chai...

Coal and rock dynamic disasters occur frequently in deep coal mining. The loading rate affects the mechanical properties behaviors. Uniaxial compression acoustic emission (AE) tests of bump-prone under various rates were carried out, properties, AE spatiotemporal evolution, spatial fractal characteristics analyzed. experimental results indicate that uniaxial compressive strength is positively r...

Original scientific paper To analyse the influence of joint angle, number and spacing on the strength and acoustic emission (AE) characteristics of rock mass, the uniaxial compression model of rock specimens was established using the micro particle flow PFC2D software platform. The intact rock parameters were determined via trial and error, joints with different angles, numbers and spacing were...

The lack of continuity conditions of the rock materials presents a serious challenge for the continuum mechanics approach, hindering the effective use of the well-established methods such as the finite element method and the boundary element methods. In the presented paper a discrete technique based on molecular dynamics approach is used for computer constructing of polycrystal materials. On th...

1 ABSTRACT ____ An experimental study was undertaken to establish the viscoelastic behavior of IM7/K3B composite in compression at elevated temperature. Creep compliance, strain recovery and the effects of physical aging on the time dependent response was measured for uniaxial loading at several isothermal conditions below the glass transition temperature (T g). The IM7/K3B composite is a graph...

Mechanically sensitive nociceptor afferents were studied in a preparation of isolated skin from rat leg. Each neuron was studied while the skin was subjected to tensile and compressive loading. The experiment was designed to create highly uniform states of stress in both tension and compression. Tensile loads were applied by pulling on the edges of the sample. Applied loads were used to determi...