In order to directly control the premixed combustion phasing, a Jet Controlled Compression Ignition (JCCI) for diesel premixed compression ignition systems is investigated. Experiments were conducted on a single cylinder natural aspirated diesel engine without EGR at 3000 rpm. Numerical models were validated by load sweep experiments at fixed spark timing. Detailed combustion characteristics we...

The standard design parameters of a compression ignition engine fail to give specified performance with strait vegetable oil (SVO) from different origins. This study is performed to find the effect of compression ratio on emission characteristics such as carbon monoxide (CO), carbon dioxide (CO2), hydrocarbon (HC), nitrogen oxides (NOx) and smoke opacity with all the tested fuels in a single cy...

Combustion in homogeneous charge compression ignition (HCCI) engine is controlled auto ignition of well-mixed fuel, air and residual gas. Since onset of HCCI combustion depends on the auto ignition of fuel/air mixture, there is no direct control on the start of combustion process. Therefore, HCCI combustion becomes unstable rather easily especially at lower and higher engine load. Charge strati...

The Homogeneous Charge Compression Ignition (HCCI) combustion concept lacks direct ignition timing control, instead the auto ignition depends on the operating condition. Since auto ignition of a homogeneous mixture is very sensitive to operating conditions, a fast combustion timing control is necessary for reliable operation. Hence, feedback is needed and the crank angle of 50% burnt (CA50) has...

Advanced combustion modes such as Controlled Auto-Ignition or Homogeneous Charge Compression Ignition have been under much attention due to their ability to reduce both emissions and fuel consumption. Thus, this paper aims at demonstrating the achievement of Controlled Auto-Ignition combustion on a standard 4-cylinder gasoline engine with negative valve overlap (NVO) and analyzing its performan...

Dual-fuelling provides a suitable method for operating compression-ignition engines on alternative fuels. The CFD package Fluent is being used to model the direct-injection of two such fuels simultaneously into an engine. The CFD models have been initially calibrated using high-speed photographic visualisation of the jets. Different orientations and staging of the jets with respect to each othe...

The alternative HCCI combustion mode presents a possible means for decreasing the pollution with respect to the conventional gasoline or diesel engines, while maintaining the efficiency of a diesel engine or even increasing it. This paper investigates the possibility of using gasoline in an HCCI engine and analyses the auto-ignition of gasoline in such an engine. The compression ratio that has ...