The chemical composition of mentha essential oil and mentha extracts obtained at different pressures/temperatures by supercritical fluid extraction (SFE) were studied by GC–MS. The menthol content was also determined spectrophotometrically. The predominant compounds in the essential oil and in the CO2 extract obtained at 100 bar were L-menthon and menthole but at higher pressures (from 150 to 4...

The simultaneous esterification and transesterification of Jatropha curcas oil (JCO) was carried out in the presence of Bi2O3 (1–7 wt.%) modified La2O3 catalyst at atmospheric pressure. The catalyst were characterized by X-ray diffraction (XRD), BET surface area, desorption of CO2 (TPD-CO2) and NH3 (TPD-NH3). Under the optimal reaction condition of methanol/oil molar ratio of 15:1, 2 wt.% of ca...

Title of Dissertation: HEAT TRANSFER AND MECHANICAL DESIGN ANALYSIS OF SUPERCRITICAL GAS COOLING PROCESS OF CO2 IN MICROCHANNELS Guohua Kuang, Doctor of Philosophy, 2006 Directed By: Professor Michael Ohadi, Department of Mechanical Engineering Professor Balakumar Balachandran (Co-Advisor), Department of Mechanical Engineering An extensive review of the literature indicates a lack of systematic...

Anthropogenic effects on climate can be mitigated through various measures, among them being CO2 sequestration in geological media. Geological sinks for CO2 do not need any major new technological development; the technology exists and has been applied for other uses. The challenge is rather to identify the most appropriate methods and sites for long-term sequestration. There are several potent...

Well blowout rates in oil fields undergoing thermally enhanced recovery (via steam injection) in California Oil and Gas District 4 from 1991 to 2005 were on the order of 1 per 1,000 well construction operations, 1 per 10,000 active wells per year, and 1 per 100,000 shutin/idle and plugged/abandoned wells per year. This allows some initial inferences about leakage of CO2 via wells, which is cons...

Internal corrosion is a common problem in pipelines transporting oil and gas containing corrosive components such as CO2 and H2S. In many mature oil wells, the water cut and CO2 content may reach high level which forms a suitable environment for initiation and growth of corrosion. To avoid the consequences of corrosion, process parameters should always be controlled within safe operating limits...

[1] The interfacial interaction between mineral surfaces and immiscible fluids determines the efficiency of enhanced oil or gas recovery operations as well as our ability to inject and store CO2 in geological formations. Previous studies have shown that the interfacial tension and contact angle in CO2‐water‐mineral systems change noticeably with fluid pressure. We compile previous results and e...

This study describes the environmental impact of the material production, transportation, and construction phases from the construction site perspective. CO2 emissions for each process were determined using the Korea Life Cycle Inventory Database (LCI DB) in the material production phase, and the actual amounts of oil consumption for transportation equipment were identified in the material tran...

Geologic CO2 storage has been identified as a key to avoiding dangerous climate change. Storage in oil reservoirs dominates the portfolio of existing projects due to favorable economics. However, in an earlier related work ( Al-Menhali and Krevor Environ. Sci. Technol. 2016 , 50 , 2727 - 2734 ) , it was identified that an important trapping mechanism, residual trapping, is weakened in rocks wit...

The kinetics of the extraction of tea seed oil with supercritical CO2 was studied. A kinetic model of the extraction of tea seed oil using supercritical CO2 was developed on the basis of the differential mass balance to simulate the extraction process. The model could simulate the distribution of the solute concentration in CO2 inside the extraction bed as a function of extraction time and heig...