This work identifies the main phenomena that control the peptisation and transport of clay particles in a sand core. Clay can be dispersed into small particles in an aqueous solution of low ionic strength. This property is used to generate clay particles with NaCl concentration varying from 0.5 M to 0.015 M. For this purpose, a chromatographic column is initially packed with a 5 % clay-sand mix...

* Corresponding author Abstract – Land degradation processes in the subtropical Thicket Biome in the Eastern Cape Province, South Africa, are observed and monitored. As a result, a significant loss of soil quality on such sites has been recorded. This study focuses on the determination of fundamental soil parameters like organic carbon, iron, and clay in order to assess ecosystem degradation. T...

Sulfonated styrene-(ethylene-butylene)-styrene triblock copolymer (SSEBS) was synthesized by reaction of acetyl sulfate with SEBS. SSESB-clay nanocomposites were then prepared from hydrophilic Na-montmorillonite (MT) and organically (quaternary amine) modified hydrophobic nanoclay (OMT) at very low loading. SEBS did not show improvement in properties with MT-based nanocomposites. On sulfonation...

The microstructures and chemical compositions of stonepaste bodies from the Islamic Middle East, typically produced from a mixture of ten parts crushed quartz, one part crushed glass and one part white clay, are investigated using analytical scanning electron microscopy. For comparison, replicate stonepaste bodies are produced in the laboratory at firing temperatures in the range 900e1200 C, an...

A novel polyimide (PI)/clay hybrid nanocomposite, designated as PI (PAAS)/CM, has been developed from the poly(amic acid) salt of triethylamine and organomontmorillonite (CM) using a mixture solution of tetrahydrofuran (THF) and methanol (MeOH). For comparison, two other PI/clay hybrids derived from poly(amic acid) and CM in THF/MeOH solution and N,N9-dimethylacetamide (DMAc) solution, denoted ...

Compacted clay liners (CCLs) are the main materials used in waste disposal landfills due to their low permeability. In this study, the effect on the shear resistant of clays with inorganic salt solutions as permeate fluid was experimentally investigated. For this purpose, NaCl inorganic salt solution at concentrations of 2, 5, 10% and deionized water were used. Laboratory direct shear and Vane ...

ruffling is a practice through which the mycelia containing casing soil will be thoroughly mixed. to evaluate the effects of ruffling of different casing soils in button mushroom production, an experiment was conducted comprised of three levels of ruffling; no ruffling, deep ruffling vs. superficial scratch and eight different types of casing soils, namely: holland peat (c1), north peat (c2), s...

in this study, thermoplastic polyolefin elastomeric (tpo) nanocomposites were fabricated by friction stir processing. the effect of different pin geometries on clay dispersion and mechanical properties of the tpo nanocomposite reinforced with 3% wt nanoclay has been first investigated. the optimum pin geometry namely threaded cylindrical pin was then used to fabricate the nanocomposites contain...

This research presents an experimental study of the strength and microstructural characteristics cement-bottom ash-admixed Bangkok clay, paying special attention to efficiency adding up bottom ash (BA) different finesses as a cementitious material role played by BA in enhancing mixture. The obtained results were discussed with cemented clay mixed other industrial ashes (i.e., fly risk husk ash)...