For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Selective Laser Sintering is a powderbased technique to produce plastic prototypes (Rapid Prototyping) or metal mould inserts (Rapid Tooling). The laser sintering of ce...

Abrasion and corrosion resistant steel has attracted considerable interest for industrial application as a means of minimising the costs associated with product/component failures and/or short replacement cycles. These classes of steels contain alloying elements that increase their resistance to abrasion and corrosion. Their benefits, however, currently come at a potentially prohibitive cost; s...

Early generation ceramic articulations were problematic in terms of ceramic implant fracture and wear. Although the mechanical properties of ceramic material have improved during the last three decades, ceramic component fracture remains an issue. Many authors have reported fractures of the ceramic head, and a few have described ceramic acetabular insert fracture. However, these complications a...

Total hip arthroplasty (THA) is a surgical procedure that involves the replacement of the damaged joint of the hip by an artificial device. Despite the recognized clinical success of hip implants, wear of the articulating surfaces remains as one of the critical issues influencing performance. Common material combinations used in hip designs comprise metal-on-polymer (MoP), ceramic-on-polymer (C...

Bone grafting has come a very long way since a Dutch surgeon used pieces of a dog’s skull to repair a soldier’s cranium in the 17 th Century. Current technology aims to deliver a scaffold that combines the unique osteogenic properties of ceramic biocomposite materials to make the best mimic of physiologic conditions. To do so, a scaffold must provide: i) A three-dimensional platform allowing fo...

Porous ceramics composite was prepared with mixed powders (Al, TiO2 and B2O3) by SHS (Self-propagating High-temperature Synthesis) method. The effects of the particle size of aluminum power, the additives of SiC and the compacting pressure on the product properties and the pore size, as well as the combustion process in the Al2O3-TiB2 system were researched. The effects of all factors on proper...

BACKGROUND Squeaking after ceramic-on-ceramic total hip arthroplasty is a relatively uncommon phenomenon. It usually does not require treatment in the absence of pain, mechanical symptoms, and/or relentless squeaking. The purpose of this investigation was to report on four patients who presented with hip pain and squeaking due to fractured ceramic liners after ceramic-on-ceramic total hip arthr...

in this research, using pyrolysis of phenolic resin in the presence of silicon particles, the sic ceramic composite is formed. the samples were prepared by introducing 30, 35, 40, 45 and 50 wt% of si particles to the phenolic resin. the samples were cured at 180°c then carbonized at 1100°c. the final carbonized c/si composites are hot-pressed at 1500°c in inert atmosphere, which is more than th...

Ceramic insulators are widely used in transmission as well as in distribution lines. As outdoor insulators, the ceramic insulators are subjected to environmental stresses. In particular case, the insulators may severe high pollution exposure. Under the polluted condition, high leakage current will flow on the insulator surface and dry band arching may take place. The phenomena may initiate the ...

We made a semiquantitative study of the comparative histology of pseudomembranes from 12 loose cemented ceramic-ceramic and 18 metal-polyethylene total hip replacements. We found no significant difference in cellular reaction between the two groups, but there was a major difference in the origin of the particulate debris. In the metal-polyethylene group, polyethylene of articular origin was pre...