Gas-particle flows are involved in various industrial applications in the energy, oil and gas fields, like coal gasification, production of light hydrocarbons by fluid catalytic cracking, catalytic combustion and different treatments aiming to reduce or eliminate pollutants. In addition, gas-particle flows take part to interesting natural phenomena, like volcanic eruptions, and their understand...

Chlorinated aromatics are unintentionally formed and released from combustion and other thermal processes involving organic matter and chlorine. The catalytic activity of incinerator fly ash in the low-temperature formation of chlorinated aromatics has been demonstrated in both laboratory experiments and full-scale trials. Copper has been shown to be an effective catalyst, but several other tra...

Crossed Fe2O3 nanosheets supported cobalt oxide nanoparticles on three-dimensionally macroporous nickel foam substrate (xCo/Fe-NF) was designed and successfully prepared through a facile hydrothermal and impregnation route. These catalysts showed high catalytic soot combustion activities under self-capture contact mode. The three-dimensional macroporous structures of Ni foam and the crossed Fe2...

Exhausts of airship fabric bag in the stratosphere such as hydrogen which can be used for fuels by using catalytic combustion method. This can save the extra fuels used in the power system. Pd/γAl2O3 catalyst was prepared in this work by impregnation method and the H2 catalytic combustion reaction kinetic was investigated between the pressure of 3.6 kPa and 101.3 kPa. The effects of temperature...

The use of a waste-based secondary fuel in clinker kilns is a widely used practice. Nevertheless, specific studies to understand the destruction mechanism of exhaust pollutants in cement raw material (CRM) are limited. This work focuses on the possible catalytic effect of the interaction of exhaust gases from the combustion of sewage sludge with various solids beds, including CRM. Catalyst base...

Nanoditches from selective etching of periodically twinned SiC nanowires were employed to hinder the migration and coalescence of Pd nanoparticles supported on the nanowires, and thus to improve their catalytic stability for total combustion of methane. The results show that the etched Pd/SiC catalyst can keep the methane conversion of almost 100% while the unetched one has an obvious decline i...

Barium hexafemte doped with iridium was synthesized by two methods: the citrate gel and the polyacrylamide gel methods. The nature of phases obtained and the specific surface area were determined after heat treatments in air at 700°C, 900°C and in air containing 10% humidity at 1200°C. The catalytic activity in the combustion of methane was measured after heat treatment at 900°C. These hexaferr...

BiFeO3 (BFO), Bi0.86Sm0.07Eu0.07FeO3 (BSEFO), and Bi0.86Sm0.07Cd0.07FeO3 (BSCFO) nano powders were prepared by the sol-gel combustion method and the catalytic performances were evaluated in the acetylation reaction of benzyl alcohol. The physical chemical properties of the catalysts were character...