Three new ceramic batches with no traditional fluxes and 30, 50 and 70 wt.% blast furnace slag were studied. The processes of phase formation and densification were estimated in non-isothermal conditions by differential thermal analysis and dilatometry, respectively. After that the degrees of sintering, obtained after heat-treatment at different temperatures and times, were evaluated measuring ...

Alkali activated material has recently attracted great attention as an environmentally friendly building material. Generally, it exhibits higher mechanical properties and better durability when compared with Portland cement based materials. In this article, mixed alkali activated systems consisting of N-A-S-H and C-A-S-H hydrated gels were produced, using metakaolin as a dominated starting mate...

Limestone filler is a raw material that is already used in several applications like paints, bricks, bituminous mixtures...etc. Moreover, and particularly in Belgium, classical additions for concrete like fly ashes and granulated blast furnace slags are becoming rare; there is a need for new additions that could have a positive effect on the properties of the fresh and hardened cementitous comp...

Slag-containing pastes and concretes were analysed by element-specific synchrotron-based techniques to determine the speciation of iron on crushed materials through spatially resolved micro-spectroscopic studies. The investigated cement samples hydrated either in laboratory, or exposed river sea water. Metallic iron, along with minor proportions sulphide magnetite was detected laboratory sample...

Foamed mortar with a density of 1300 kg/m³ was prepared. In the initial laboratory trials, water-to-cement (w/c) ratios ranging from 0.54 to 0.64 were tested to determine the optimal value for foamed mortar corresponding to the highest compressive strength without compromising its fresh state properties. With the obtained optimal w/c ratio of 0.56, two types of foamed mortar were prepared, name...

The results of using the developed methodology for predicting distribution coefficients charge elements between products blast-furnace smelting based on calculation integral parameters and temperature-blowing regime modern operating conditions one blast furnaces in Ukraine are presented. proposed approach differs from traditional methods considering as constant values provides a predictive chem...