Biological wastewater treatment typically requires the use of bacteria for degradation of carbonaceous and nitrogenous compounds present in wastewater. The high lipid containing biomass can be used to extract oil and the contents can be termed as bio-oil (or biodiesel or myco-diesel after transesterification). The separate experiments were conducted on actual wastewater samples with 5% v/v inoc...

Waste cooking oil (WCO) is a kind of non-edible oil with enormous quantities and its unreasonable dispose may generate negative impact on human life and environment. However, WCO is certainly a renewable feedstock of bio-based materials. To get the rebirth of WCO, we have established a facile and high-yield method to convert WCO to bio-based zwitterionic surfactants with excellent surface and i...

This study offers comprehensive details on the use of bio-fuel as a viable and alternative source of energy. The bio-fuel was prepared from vegetable oil, i.e., mustard oil and tested in a diesel engine in both pure form and as a diesel blend. The mustard oil blend proportions were 20%, 30%, 40% and 50% and named as bio-diesel blends B20, B30, B40 and B50. A fuel-testing laboratory determined t...

Bio-oils from the fast pyrolysis of switchgrass forage and two sets of alfalfa stems (from two stages of developmentsbud and full flower stages) have been analyzed by wet-chemical methods, GC-MS, and HPLC. The chemical composition of bio-oil is important because it may give insights into its quality, stability, or suitability for downstream upgrading. Pyrolysis experiments were conducted at 500...

fast pyrolysis is an attractive technology for biomass conversion, from which bio-oil is the preferred product with a great potential for use in industry and transport. corn wastes (cob and stover) and eucalyptus wood are widely being produced throughout the world. in this study, fast pyrolysis of these two materials were examined under the temperature of 500 °c; career gas flow rate of 660 l h...

The presented study aims to improve the quality of bio-oils by catalytic upgrading of pyrolysis bio-oil from microwave pyrolysis of biomass using transition metal modified activated carbon (AC) catalyst. A central composite experimental design (CCD) was used to optimize the reaction conditions for high quality bio-oil production. The effects of reaction temperature and reaction time on product ...

In the case of development and utilization of bio-oils, a quantitative chemical characterization is necessary to evaluate its actual desired characteristics for downstream production. This paper describes an analytical approach for the determination of families of lightweight chemicals from bio-oils by using GC-MS techniques. And on this basis, new explorations in the field of influence factors...

Supercritical CO2 extraction was employed to separate simulated and real bio-oils. Effects of extraction pressure, temperature and adsorbents on distribution coefficient (or enrichment coefficient) of five representative compounds were investigated using a simulated bio-oil, which was composed of acetic acid (AC), propanoic acid (PA), furfural (FR), acetylacetone (AA) and 2-methoxyphenol (MP). ...

using environmental-friendly methods in order to remove or reduce oil pollutants and their derivations in the environment are developing. in this study, the biodegrading ability of bacillus subtilis .sp which has been separated from oil-polluted soil was examined. it was revealed that it can reduce surface tension of growth medium and produce bio-surfactant at 37 and 20 degrees centigrade. also...

Recently, bio-based oil was used as industrial lubricant due to the increasing consideration on environment effect and health issues and in order to replace the usage of petroleum-based oil. The modified vegetable oil exhibit excellent lubrication and tribological performances when compared to the petroleum-based oil. In this study, the crude jatropha oil was modified via chemical modification ...