Objective: This study evaluated the reinforcing effect of glass fiber-reinforced composite (FRC) reinforcement on flexural strength at the proportional limit (FS-PL) of a repaired denture base resin. Materials and methods: Repaired denture base resins reinforced with metal and with FRC reinforcement, and that without reinforcement were tested. The ultimate flexural strength, the FS-PL and the e...

OBJECTIVE The shear bond strengths of two hard chairside reline resin materials and an auto-polymerizing denture base resin material to cast Ti and a Co-Cr alloy treated using four conditioning methods were investigated. MATERIAL AND METHODS Disk specimens (diameter 10 mm and thickness 2.5 mm) were cast from pure Ti and Co-Cr alloy. The specimens were wet-ground to a final surface finish of 6...

abstract background and aim: one of the major problems with resin composite restorations is the weakness of bonding between the new and aged composites. since appropriate micromechanical retention is necessary for the repair of aged resin composite restorations, the level of surface roughness after sandblasting can be influential in this regard. considering the diverse composition of available ...

BACKGROUND The objective of this study was to evaluate the effect of orthodontic bracket base shape on shear bond strength and adhesive remnant index. MATERIAL AND METHODS In this in vitro study using 140 bovine incisors, shear bond strength (SBS) of brackets with different base shapes (rectangle, flower, round, heart, diamond, star, and football) were measured with an Instron testing machine...

The objective of this study was to evaluate the influences of enamel shape and bracket base configuration on shear bond strength from a biomechanical point of view. To this end, shear bond test and stress analysis using finite element method (FEM) were performed. Results obtained from both tests were then comprehensively investigated. Maxillary incisors were prepared for plane specimens, while ...

objective: the purpose of this study was to evaluate the transverse strength of one brand of denture base material repaired with two autopolymerized acrylic resins with and without wire reinforcement. materials and methods: eighty samples (2.5×10×65 mm3) were fabricated and divided into five groups. the control group was left intact. groups b and d specimens were repaired with autopolymerizing ...