A pallet rack is a structure in which the beams and uprights are cold-formed steel sections. The beam-upright connections are normally clipped in order to select the beam levels required and for ease of assembly. For this reason, the uprights contain holes and perforations distributed along their length. The complexity of these components, with local, distortional and torsional/flexural bucklin...

Natural frequencies of a clamped axially loaded beam carrying an eccentric end rigid body are computed. A linearly varying non-follower axial force representing the beam’s own weight is taken into consideration. An analytical form of the frequency equation of the structure is obtained and solved numerically. The parameters associated with the end rigid body, the mass, the rotary inertia and the...

PURPOSE To investigate the effect of reducing tooth preparation and ceramic thickness on fracture resistance of lithium disilicate crowns. MATERIALS AND METHODS Specimen preparation included a standard complete crown preparation of a typodont mandibular left first molar with an occlusal reduction of 2 mm, proximal/axial wall reduction of 1.5 mm, and 1.0 mm deep chamfer (Group A). Another typo...

structural health monitoring of cracked structures is one of beloved subject of researchers recently. consider of crack behavior in the water and energy pipeline is important because of environmental problems. in this paper consider of crack parameters in the underwater pipe subjected to mechanical transient load is investigated. for this purpose, three- dimensional parametric model of cracked ...

Using principle of minimum total potential energy approach in conjunction with Rayleigh-Ritz method, the electro-thermo-mechanical axial buckling behavior of piezoelectric polymeric cylindrical shell reinforced with double-walled boron-nitride nanotube (DWBNNT) is investigated. Coupling between electrical and mechanical fields are considered according to a representative volume element (RVE)-ba...

This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

In this paper, crashworthiness characteristics of conical steel tubes stiffened by annular rings and rigid polyurethane foam are investigated. For this purpose, wide circumferential rings are created from the outer surface of the conical tube at some determined areas along tube length. In fact, this method divides a long conical tube into several tubes of shorter length. When this structure is ...

Effect of geometry on crushing behavior, energy absorption and failure mode of woven roving jute fiber/epoxy laminated composite tubes were experimentally studied. Investigations were carried out on three different geometrical types of composite tubes (circular, square and radial corrugated) subjected to axial compressive loading. It was observed in axial crushing study that the load bearing ca...

BACKGROUND Accurate measurement of forces through the proximal radius can assess the effects of some surgical procedures on radioulnar load sharing, but is difficult to achieve given the redundant loading nature of the musculoskeletal system. Previously reported devices have relied on indirect measurements that may alter articular joint location and function. An axial load transducer interposed...