Measurements of film mass flow rate for annular, diabatic steam-water flow in tubes are presented. The measurements were carried out with four axial power distributions and at several axial positions at conditions typical for boiling water reactors, i.e. 7 MPa pressure and total mass flux in a range from 750 to 1750 kg/ms. The results show that the influence of the axial power distribution on t...

On the basis of small axial fan with five blades, 6 types of small axial flow fans with different chord lengths splitter blades were designed. Numerical simulation of 6 fan models with splitter blades and prototype fan were done by using Fluent. Based on the obtained simulation results, internal flow characteristics and aerodynamic noise were analyzed and compared. It indicates that: splitter b...

In the present study, finite element calculations are performed of blood flow in the carotid artery bifurcation under physiological flow conditions. The numerical results are compared in detail with laser-Doppler velocity measurements carried out in a perspex model. It may be concluded that the numerical model as presented here is well capable in predicting axial and secondary flow of incompres...

Background. It has been suggested that left ventricular unloading at the time of reperfusion provides superior infarct salvage over reperfusion alone. The purpose of this study was to show that the Hemopump transvalvular axial-flow left ventricular assist device provides superior left ventricular unloading, ischemic zone collateral blood flow, and infarct size reduction compared with intra-aort...

The onset mechanism for band formation of a granular mixture in long rotating tumblers is still largely unresolved. We study this issue for axial segregation of binary mixtures having different size particles, using discrete element method simulations. Endwalls initiate axial segregation via an axial flow due to friction. The non-uniform distribution of axial velocity in the flow together with ...

Investigation to evaluate axial wall heat conduction has been conducted for heat transfer in a laminar flow circular tube with two classical thermal boundary conditions at the outside wall. The tube ends are either adiabatic or with heat losses. The simulation is three-dimensional with various wall materials, wall thicknesses and tube lengths. A wide range of Peclet number from 7 to 14,000 is c...