This paper describes the needs of the aviation and automotive markets for structural materials and presents examples of developments of aluminum alloy products to fill these needs. Designers of aircraft desire materials which will allow them to design lightweight, cost-effective structures which have the performance characteristics of durability and damage tolerance. Their needs are being met b...

In this study, the hot corrosion of TiAl, TiAlNb, and Ti3AlNb intermetallics with or without enamel coating and sputtered TiAlCr coating in (Na, K)2SO4 + NaCl melts at 750oC is investigated. The interfacial reaction between enamel and those alloys during hot corrosion has also been evaluated. The results indicate that severe corrosion of bare alloys occurs due to the self catalysis chlorination...

In the present paper, a numerical study is performed to investigate the response of different plates aluminum alloys subjected to low velocity impact condition. In this regard, the square AA5083-H116 aluminum plates with dimensions 300×300 and 3 mm and 5 mm thick under low velocity impact are modelled, and a mesh convergence study is carried out to decide the appropriate number of elements. In ...

The main task of this work was to study the influence of the cooling conditions after homogenization of the 6082 aluminium alloys. The effect of the solution heat treatment temperature on the mechanism and ageing kinetics of the two commercial wrought aluminum alloys 6005 and 6082 was also analyzed. The alloys were heat treated—T4 with a wide range of solution heat treatment temperature from 51...

although the solubility of oxygen in molten aluminum alloys is said to be negligible, the fresh surface of the melt oxidizes quickly in the air and an oxide film is formed on the melt surface. oxide-metal-oxide sandwich technique is a method for the study of short-time surface oxide films. in this research, air was blown at 0.5 atmosphere into the melts of al-1mg and al-6mg alloys by means of a...

-s 211 WELDING JOURNAL ABSTRACT. Laser beam welding (LBW) has become common practice in the production lines of several industrial sectors including the electronics, domestic appliances, and automotive industries. The advantages of LBW over conventional fusion welding processes (mainly GMAW and GTAW) is the lower welding heat input and smaller weld pool and HAZ dimensions, which are associated ...

A technique for measuring the linear contraction during and after solidification of aluminum alloys was improved and used for examination of binary and commercial alloys. The effect of experimental parameters, e.g., the length of the mold and the melt level, on the contraction was studied. The correlation between the compositional dependences of the linear contraction in the solidification rang...

Aluminum alloys are used in many applications in which the combination of high strength and low weight is attractive; ship building, air frame, transportation industry etc. are some areas in which the low weight can be significant value. Friction stir welding (FSW) is a new welding technique particularly well suited to aluminum alloys though this technique is also used for other materials. Fric...

The influence of alloy composition on the environmental impact of the production of six aluminum casting alloys (Al Si12Cu1(Fe), Al Si5Mg, Al Si9Cu3Zn3Fe, Al Si10Mg(Fe), Al Si9Cu3(Fe)(Zn) and Al Si9) has been analyzed. In order to perform a more precise environmental impact calculation, Life Cycle Assessment (LCA) with ReCiPe Endpoint methodology has been used, with the EcoInvent v3 AlMg3 alumi...

Aluminum-based amorphous alloys exhibited an abnormally high vapor pressure at their approximate glass transition temperatures. The vapor pressure was confirmed by the formation of Al nanocrystallites from condensation, which was attributed to weight loss of the amorphous alloys. The amount of weight loss varied with the amorphous alloy compositions and was inversely proportional to their glass...