the aluminum oxide materials are widely used in ceramics, refractories and abrasives due to their hardness, chemical inertness, high melting point, non-volatility and resistance to oxidation and corrosion. the paper describes work done on synthesis of α-alumina by using the simple, non-expensive solution combustion method using glycine as fuel.aluminum oxide (al2o3) nanoparticles were synthesiz...

We examined stainless-steel, cobalt-chrome, titanium and alumina and zirconia ceramic femoral heads retrieved at revision surgery. All the heads had articulated against ultra-high-molecular-weight-polyethylene (UHMWPE) acetabular cups. We studied the simulation of third-body damage and the wear of UHMWPE against the various materials used for the heads. The surfaces of the retrieved heads were ...

The possibility of using the "Brazilian test" method to determination tensile strength σt composite zirconia ceramics small-size samples were demonstrated and reliability obtained values confirmed. It was found that dependence alumina toughened (stabilized by calcium oxide) with silica addition (CaO-ATZ+SiO2 ceramics) on SiO2 concentration in them has a maximum (σt = 450 MPa, at 5 mol.%). obser...

Ceramics have some of the highest strength- and stiffness-to-weight ratios of any material but are suboptimal for use as structural materials because of their brittleness and sensitivity to flaws. We demonstrate the creation of structural metamaterials composed of nanoscale ceramics that are simultaneously ultralight, strong, and energy-absorbing and can recover their original shape after compr...

The ballistic impact performance of nanocrystalline zirconia-toughened alumina (nZTA) ceramics, comprising 15 wt% nano-yttria-stabilised zirconia in a sub-micron matrix, have been studied through depth penetration tests and compared to the results for monolithic alumina. resistance each material was evaluated by fitting against thickness ceramic targets. These show that, despite micro-Raman ana...

Shaping ceramics into complex and intricate geometries using cost-effective processes is desirable in many applications but still remains an open challenge. Inspired by plant seed dispersal units that self-fold on differential swelling, we demonstrate that self-shaping can be implemented in ceramics by programming the material's microstructure to undergo local anisotropic shrinkage during heat ...

Introduction and Background: Ceramics are inorganic, nonmetallic materials, such as alumina, beryllia, or glassceramic, whose final characteristics are produced by subjection to high temperatures. Nanomaterials is a rapidly growing area of ceramics [1-3] and can be classified into the following categories: Nano-particles submicron or ultra micron size particles; Nano-fibers – nanometer (nm) siz...