Coated wire lithium ion selective electrode was fabricated using lithium ionophore-VI, 2-nitrophenyl octyl ether (NPOE) and potassium tetrakis(p-chlorophenyl)borate (KTpClPB) on platinum wire. Lithium ion selective electrode was giving Nernstian response from 10 -1 M to 10 -4 M with a detection limit of 3x10 -5 M. The calibration slope of this lithium ion selective electrode was found to be 58....

Conventional ion-selective electrodes with a liquid junction have the disadvantage of potential drift. All-solid-state ion-selective electrodes with solid contact in between the metal electrode and the ion-selective membrane offer high capacitance or conductance to enhance potential stability. Solution-casted chitosan/Prussian blue nanocomposite (ChPBN) was employed as the solid contact layer f...

in this research, a pvc membrane electrode for manganese (ii) ions based on n-(2-picolinamidoethyl)picolinamide as neutral carrier was prepared. the electrode exhibits a nemstian responseover mn(ii) concentration range of (1.0 x10-5 t01.0 x 10-1m) with a slope of 29.3±0.5 mv perdecade of concentration with a working ph range of 4.0-9.0. it has a fast response time (

In order to study the Cu(II) ion selective electrode, an optimized membrane was prepared by mixing of 30 mg of PVC powdered, 5 mg of considered ionophore, 60 mg of plasticizer and 5 mg of additive. The sensor showed a near Nernstian response for Cu(II) ions over a concentration range from 1.0×0-6 –1.0×0-2 M with a slope of 28.90.5 mV per concentration decade with a working pH range of 3.5-6.3. ...

in this research, the interaction of hexadecyl trimahyl ammonium bromide (htab) with enzyme ureasehas been investigated comprehensively at different experimental conditions such as ionic strength, proteinconcentration using ion selective membrane electrode of surfactants. the obtained binding isotherms frompotentiometnc studies have been analyzed by different theories such as wyman binding pote...

objective: evidence shows that the powder/liquid mixing ratio recommended by the manufacturers is often not respected when mixing the glass ionomer (gi) powder and liquid, yielding a gi cement with disproportionate powder/liquid ratio. considering the confirmed effect of powder/liquid ratio on the gi properties, and more importantly, its fluoride release potential, this study aimed to assess th...