Nitriding is a surface treatment technique used to introduce nitrogen into metallic materials to improve their surface hardness, mechanical properties, wear resistance and corrosion resistance. In this research, the effects of plasma nitriding parameters including frequency and duty cycle were investigated on samples with different grooves dimensions. Steel blocks prepared from DIN1.2344 hot wo...

in this work, effects of homogenization time of 3 to 13 h at 1200 °c on the grain refinement of as-cast aisi 301 stainless steel after different hot rolling conditions were investigated. the results showed that the minimum grain size of 16±7 mm was achieved when homogenization took place at 1200 °c for 9 h followed by hot rolling at temperature range of 1000–1200 °c with strain of 0.8 and strai...

This work investigates the machining characteristics of American Iron and Steel Institute (AISI) D2 tool steel with copper as a tool electrode during electrical discharge machining (EDM) process. The multi wall carbon nano tube (MWCNT) is mixed with dielectric fluids in EDM process to analyze the surface characteristics of surface roughness. Regression model were developed to predict the surfac...

in this work dynamic recrystallization behavior of aisi 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 c -1200 c and strain rate range of 0.001 s-1 - 1 s-1. the obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. the flow stress and strain corresponding to the critical, pe...

A judicious choice of insert material, tool geometry and cutting conditions can make hard turning produce better surfaces than grinding. In the present study, an attempt has been made to investigate the effect of cutting tool materials on cutting forces (feed force, thrust force and cutting force) in finish hard turning of AISI D2 cold work tool steel. In conclusion of the results obtained with...