Neural Network Modeling and Particle Swarm Optimization (PSO) of Process Parameters in Pulsed Laser Micromachining of Hardened AISI H13 Steel J. Ciurana a; G. Arias b; T. Ozel c a Department of Mechanical Engineering and Industrial Construction, Universitat de Girona, Spain b Department of Mechanical Engineering, Universitat Politècnica de Catalunya, Spain c Department of Industrial and Systems...

The monotonic and cyclic deformation behavior of ultrafine-grained metastable austenitic steel AISI 304L, produced by severe plastic deformation, was investigated. Under monotonic loading, the martensitic phase transformation in the ultrafine-grained state is strongly favored. Under cyclic loading, the martensitic transformation behavior is similar to the coarse-grained condition, but the cycli...

silica refractory bricks are used especially in the metallurgical industries, due to desirable properties suchas high melting point, rigidity, and high temperatures strength. in this research, different amount of sicwere added to silica refractory containing different binders such as borax, boric acid, calcium nitride,sodium tri poly phosphate, sodium hexa meta phosphate (shmp) and lime. physic...

This work investigates the machining characteristics of American Iron and Steel Institute (AISI) D2 tool steel with copper as a tool electrode during electrical discharge machining (EDM) process. The multi wall carbon nano tube (MWCNT) is mixed with dielectric fluids in EDM process to analyze the surface characteristics of surface roughness. Regression model were developed to predict the surfac...

This study was attempted to develop a process model, using the temperature values measured by the coupled infrared temperature measurement system (pyrometer and camera) correlated with the measured values of case depth hardness of the tool steel AISI S7 (hypoeutectoid steel) for the specified multi-pass laser heat treatment conditions (1000–2500 J). A number of heat treatment experiments by cha...

In this study the effects of surface texture on the fatigue life of a high-strength low-alloy steel were evaluated in terms of the apparent fatigue stress concentration. An abrasive waterjet was used to machine uniaxial dogbone fatigue specimens with specific surface quality from a rolled sheet of AISI 4130 CR steel. The surface texture resulting from machining was characterized using contact p...

As an advanced manufacturing technology which has been developed rapidly in recent years, high speed machining is widely applied in many industries. The chip formation during high speed machining is a complicated material deformation and removing process. In research area of high speed machining, the prediction of chip morphology is a hot and difficult topic. A finite element method based on th...

The amount of energy that can be gained from the wind is unlimited, unlike current energy sources such as fossil and coal. While there is an important push in the use of wind energy, gears and bearing components of the turbines often fail due to contact fatigue, causing costly repairs and downtime. The objective of this work is to investigate the potential tribological benefits of two phosphoni...

Welding is a manufacturing process, which is carried out for joining of metals by Metal Inert Gas (MIG) welding. This is the one types of Gas Metal Arc Welding (GMAW), in which Argon and Helium is used as a inert gas. Shielding gas Argon and Helium is used and consumable electrode is used which also plays role of conductor. MIG welding is versatile, gives very little loss of alloying elements a...

The raw materials traditionally used as sources of chromium carriers (ferrochromium, chromium oxide and chromium powder) in application chromizing processes present a high price and some difficulties for ferrochromium grinding. In this work there is an assessment of the effect that has the use of the products of a reduction aluminothermic chromium concentrate on the characteristics and properti...