A decision support system to reduce energy consumption has been validated during five months in a flat sheet membrane bioreactor pilot plant treating urban wastewater. Membrane bioreactor technology consists of biological nutrient removal combined with physical separation using microfiltration or ultrafiltration membranes for wastewater treatment. The main operational cost in membrane bioreacto...

Birds adjust their flight behaviour to the physical properties of the air. Lift and drag, the two major properties in aerodynamics, are highly dependent on air density. With decreasing air density drag is reduced and lift per wingbeat decreases. According to flight mechanical theory, wingbeat frequency and air speed should increase with decreasing air density, i.e. increasing flight altitude. A...

a laboratory stirred tank bioreactor with six single and dual-impeller configurations was tested to obtain the optimum operating conditions for future biological processes. six impeller combinations consisting of three basic impeller types, namely rushton turbine (rt), pitched 4blade (p4b) and pitched 2blade (p2b) downward flow were investigated in 1.77 l bioreactor working volume. power consum...

Streptomyces citreus CBS 109.60 produced geosmin and a complex pattern of other volatile compounds during cultivation in a 2.5-liter laboratory bioreactor. Volatiles were isolated from disrupted cells, from the culture medium, and from the waste air of the bioreactor by adsorption on Lewatit OC 1064MD. Quantitative and qualitative analyses were carried out using capillary gas chromatography and...

CL, CD, CD0 = lift coefficient, drag coefficient, and drag coefficient with zero lift DSi = dynamic soaring number sample E, Emin = aircraft total energy and minimum sustainable total energy, J g = gravity acceleration, m∕s h, hmin = altitude and safety altitude, m K = drag-polar-induced drag gain k1, k2, k3 = necessary and sufficient conditions inequality parameters L, D = lift and drag forces...

Streptomyces griseus was cultured in three different bioreactors in a medium containing chitin flakes. When a conventional bioreactor stirred by two sets of Rushton impellers and operated at high speed was used, the yield of streptomycin (3.1 mg/l) was the highest observed and occurred at approximately 500 hours. Cultivation of S. griseus in a bioreactor stirred at low speed by a U-shaped paddl...

Streptomyces griseus was cultured in three different bioreactors in a medium containing chitin flakes. When a conventional bioreactor stirred by two sets of Rushton impellers and operated at high speed was used, the yield of streptomycin (3.1mg/l) was the highest observed and occurred at approximately 500 h. Cultivation of S. griseus in a bioreactor stirred at low speed by a U-shaped paddle res...

The sensitivity of a conceptual model of a foam emulsion bioreactor (FEBR) used for the control of toluene vapors in air was examined. Model parametric sensitivity studies showed which parameters affect the removal of toluene (as model pollutant) in the FEBR the most significantly, and enabled definition of the limits of the process. Detailed examination of the results indicated that the proces...

All animals flap their wings in powered flight to provide both lift and thrust, yet few human-engineered designs do so. When combined with flexible wing surfaces, the resulting unsteady fluid flows and interactions in flapping flight can be complex to describe, understand, and model. Here, a simple modified actuator disk is used in a quasi-steady description of the net aerodynamic lift forces o...

In the wake of intensive fossil fuel usage and CO2 accumulation in the environment, research is targeted toward sustainable alternate bioenergy that can suffice the growing need for fuel and also that leaves a minimal carbon footprint. Oil production from microalgae can potentially be carried out more efficiently, leaving a smaller footprint and without competing for arable land or biodiverse l...