New generation ambient air samplers operate at much lower sampling flow rates than do their “high volume” predecessors, namely 16.7 liters/minute. When these new air samplers emerged several years ago there were limited tools available with which to assess and calibrate their operating flow rate. In 1996 a flow meter specifically designed for these new air samplers came available, known as the ...

This paper presents two-dimensional laboratory experiments performed to study how groundwater flow may affect the injected air zone of influence and remedial performance, and how injected air may alter subsurface groundwater flow and contaminant migration during in situ air sparging. Tests were performed by subjecting uniform sand profiles contaminated with dissolved-phase benzene to a hydrauli...

This study aims to optimize extraction and drying conditions of fig syrup. Drying was done in a pilot scale two-fluid nozzle spray dryer. A total of 27 experiments were conducted with varying inlet air temperatures, air flow rates, and also a maltodextrin (MD)- low methoxyl pectin (LMP) ratios. While feed rate, feed temperature, and compressed air flow rate of the atomizer were kept constant. T...

thermal modeling of an automotive cabin was performed in this paper to predict the inside cabin air temperature. to implement this task, thermal and ventilation loads were estimated and the mass and energy balance conservation equations for dry air and water vapor with considering a new parameter (air circulation ratio) as well as the balance equations of internal components of a cabin were der...

Heat transfer during compression of air in a long, thin tube is studied by CFD. The tube represents one of the many in a honeycomb geometry inserted in a liquid piston air compressor to minimize temperature rise. A dimensionless number for the heat flow rate that includes the changing heat transfer area between the tube wall and air during compression is used. From the CFD results, alinear rela...

in this paper, the methodology of aircraft air distribution system has been analyzed theoretically and experimentally. to achieve that, ducting pressure loss and air flow throw gaspers calculations has been done for cabin ducts in according to exact location of individual air distribution system in the cabin. the length of gasper air flow was compared with the distance between gasper outlet and...