drying characteristics of green pea (pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. four drying air temperatures (30, 40, 50 and 60ºc) and five microwave powers (180, 360, 540, 720 and 900w) were adopted. several experiments were conducted to obtain data for sample moisture content versus drying time. the results sh...

OBJECTIVES To investigate the effect of air-drying pressure during ceramic primer coating on zirconia/resin bonding and the surface characteristics of the primed zirconia. METHODS Two ceramic primers (Clearfil Ceramic Primer, CCP, Kuraray Medical Inc. and Z-Prime Plus, ZPP, Bisco Inc.) were applied on the surface of air-abraded zirconia (Katana zirconia, Noritake) and dried at 4 different air...

The fluidised bed drying characteristics of soybeans at high temperatures (110-140 degrees C) and moisture contents, 31-49% dry basis, were modelled using drying equations from the literature. Air speeds of 2.4-4.1 m/s and bed depths from 10 to 15 cm were used. The minimum fluidised bed velocity was 1.9 m/s. From a quality point of view, fluidised bed drying was found to reduce the level of ure...

date palm (phoenix dactylifera l.) with its delicious and nutritious bearing fruit (dates) is an important agricultural core in iran. to extend the shelf life of date palm fruit, some such methods of preservation as drying are suggested and drying influences physicochemical and quality characteristics of products, thus modeling of drying kinetics is one of the tools for process control. in this...

The thin layer drying of pine forest residues consisting of bark, needles, leaves, and chips was experimentally conducted at air temperatures of 40, 50, 60, 70, and 80C. Physical and chemical properties of fractionated forest residues were determined to evaluate its fuel properties. The experimental data obtained from thin layer drying study were fitted with Lewis, Page, and Henderson and Pabis...

Kim, M.H., Kim, S.M., Kim, C.S., Park, S.J., Lee, C.H. and Rhee, J.Y. 2002. Quality of Korean ginseng dried by a prototype continuous flow dryer using far infrared radiation and hot air. Canadian Biosystems Engineering/Le génie des biosystèmes au Canada 44: 3.473.54. This study was performed to examine the effects of infrared (IR)/hot-air combination drying on some quality attributes of Korean ...

The calculation of heat consumption is based on the First Law and it gives quantitative information about the energy used in drying. However, it does not pay any attention to the quality of the energy used in drying. To take into account the quality of the energy, attention must be paid to the Second Law, too. Especially in those cases where the energy used in drying may be converted to mechani...

In this study, the drying kinetics of granular nylon-6 has been investigated. Single particle drying experiments were carried out in a magnetic suspension balance (MSB) using dry air as drying agent. The comparison of measured and simulated data using Vrentas-Duda diffusion model shows a satisfactory prediction of mean particle moisture content and drying rates. The Flory-Huggins model predicts...

The aim of this work was to study the infrared (IR) drying of food products. In present article the effects of blanching, of air velocity and of different air temperatures on the drying time and on the rehydration ratio as a quality property are investigated. During research different food materials were used: apple, carrot and potato. In the article a simultaneous heat and mass transfer model ...

We evaluated the effects of air-drying distance and bond surface area on the shear bond strength of a 2-step etch-and-rinse adhesive. A total of 120 bovine anterior teeth were equally divided into 6 main groups based on bonding surface area. The main groups were divided into sub-groups (n = 5) according to air-drying distance. The shear strength was determined using a universal testing machine ...