Microbial fuel cell (MFC) converts the organic compounds to electricity. The higher cost of the cathode catalyst for oxygen reduction reaction (ORR) is one of the major limitations in the technology. Therefore, the study endeavored to introduce a novel cathode catalyst i.e. porous Co3O4 flakes for ORR in MFCs. The flakes exhibited the micropore surface area of 1.0372 m2/g. The MFC with cobalt o...

This study has been carried out to develop new cathode materials for two types of thermionic cathode. First is concerning to the tungsten electrodes for the plasma furnace and welding torches. The second one is the electrodes for air plasma cutting torch. Tungsten electrodes activated with a single and combined additives of rare earth metal oxides, such as La203,Y203 and Ce02,are produced and p...

A new hybrid, air-biocathode microbial fuel cell-membrane bioreactor (MFC-MBR) system was developed to achieve simultaneous wastewater treatment and ultrafiltration to produce water for direct reclamation. The combined advantages of this system were achieved by using an electrically conductive ultrafiltration membrane as both the cathode and the membrane for wastewater filtration. The MFC-MBR u...

The operation and accumulation of liquid water within the cell structure of a polymer electrolyte membrane fuel cell (PEMFC) with a dead-ended anode is observed using neutron imaging. The measurements are performed on a single cell with 53 square centimeter active area, Nafion 111-IP membrane and carbon cloth Gas Diffusion Layer (GDL). Even though dry hydrogen is supplied to the anode via press...

A multi-nuclear solid-state NMR approach is employed to investigate the lithium-air battery, to monitor the evolution of the electrochemical products formed during cycling, and to gain insight into processes affecting capacity fading. While lithium peroxide is identified by 17O solid state NMR (ssNMR) as the predominant product in the first discharge in 1,2-dimethoxyethane (DME) based electroly...

Iron aminoantipyrine (Fe-AAPyr), graphene nanosheets (GNSs) derived catalysts and their physical mixture Fe-AAPyr-GNS were synthesized and investigated as cathode catalysts for oxygen reduction reaction (ORR) with the activated carbon (AC) as a baseline. Fe-AAPyr catalyst was prepared by Sacrificial Support Method (SSM) with silica as a template and aminoantipyrine (AAPyr) as the organic precur...

The effect of different cathode strategies (mullite/MnO2, Plexiglas/Gore-Tex/MnO2, mullite/coal fly ash, mullite/biochar, mullite/activated carbon) on the performance air-cathode microbial fuel cells (MFCs) was investigated. highest maximum power output observed using MnO2 catalyst pasted Gore-Tex cloth (7.7 mW/m3), yet coulombic efficiencies (CEs) were achieved (CE 23.5 ± 2.7%) and coal ash 20...

Fuel cells with a PtAu/C anode and a Pr-doped Mn(2)O(3)/C cathode were stacked without using a bipolar plate, and their discharge properties were investigated in a methanol aqueous solution bubbled with air. A three-cell stack exhibited a stack voltage of 2330 mV and a power output of 21 mW.

A novel fullerene cathode interlayer is employed to facilitate the fabrication of stable and efficient perovskite solar cells. This modified fullerene surfactant significantly increases air stability of the derived devices due to its hydrophobic characteristics to enable 80% of the initial PCE to be retained after being exposed in ambient condition with 20% relative humidity for 14 days.