The removal of tributyltin (TBT) from artificial seawater using nZnO, activated carbon and nZnO/activated carbon composite was systematically studied. The equilibrium and kinetics of adsorption were investigated in a batch adsorption system. Equilibrium adsorption data were analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherm models. Pseudo first- and second-order...

Spent coffee grounds were evaluated for adsorption efficiency in the removal of pesticide paraquat from its aqueous solutions. The influence of the adsorbent mass, agitation time, paraquat concentration and pH have been investigated in the batch sorption mode. Adsorption capacity (mg/g) has been found to be 27.87 ± 1.57 mg/g, while the removal efficiency has resulted of 32.25 ± 1.79 %. Adsorpti...

Municipal water recycling may expose humans and the environment to trace organic contaminants. We assessed biological activated carbon (BAC) filtration for removal of organic micropollutants (MPs). Adsorption experiments were carried out in batch reactors containing secondary effluent and new granular activated carbon (GAC) and preloaded BAC media. Results show that BAC has good potential for r...

synthetic dyes are among the most common contaminants of the environment. therefore, the aim of this study was investigation the removal of basic blue 41 (bb41) and methylene blue (mb) from industrial effluents by useing raw and modified rice stems. in this study raw and modified rice stems treated chemically with citric acid (ca) and were used to explore the potentiality of rice stems for remo...

The heavy metals, such as Pb(II) and radioisotope Cr(III), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is of the utmost importance to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, the reduced graphene oxide based inverse spinel nic...

Background & objectives: Xylene, which can pollute the water sources, is widely used as a solvent in insecticide manufacture, dye and leather and other industries. Adsorption is one of the most common processes used to treat the contaminated aqueous solutions by xylene. Therefore, the aim of this study was to compare the xylene removal efficiency and adsorption isotherms of magnetic nanoparticl...

Constructed wetlands are an attractive choice for removing arsenic (As) within water resources used for drinking water production. The role of substrate and vegetation in As removal processes is still poorly understood. In this study, gravel, zeolite (microporous aluminosilicate mineral), ceramsite (lightweight expanded clay aggregate) and manganese sand were tested as prospective substrates wh...

In this study, montmorillonite clay was used as the adsorbent for the removal of Aniline Blue dye, from aqueous solution by the batch adsorption technique under different conditions. The maximum removal of aniline blue dye for initial dye concentration 20 mg/L was more than 95% at optimum conditions (pH=4.5, contact time=30 min, and adsorbent dosage=2 g/L). The data of this study were fitted wi...

in this work, efficiency and performance of hazelnut shells (hs) adsorbent was examined for the removal and recovery of direct red 12b (dr12b) from wastewater. the absorbance of dr12b was measured spectrophotometrically at λmax=523 nm before and after adsorption of dr12b. the maximum removal was 99.8% for 30 mg l –1 ofdr12b concentration on 0.3 gr hs adsorbent. acidic ph was favourable for the ...

Degradation of Iodinated X-Ray Contrast Media by Ozone and Ozone/H2O2 High solubility in water Low vapour pressure Low distribution coefficient, log kow = 2.33 Low potential for adsorption Low potential for bioaccumulation Chemical and biological stability Option 1. • Removal by conventional municipal wastewater treatment “There is no significant removal of x-ray contrast media by conventional ...