Objectives: This In-vitro study was designed to compare the Impact strength and Residual monomer content of conventional and high impact types of denture base resins polymerized by Compression and Injection molding technique with short curing cycle. Materials and Methods: Forty samples were made (twenty from each technique)in the dimension of 60 × 10 × 3 with 2 mm notch on the thickness side. T...

The association between a toothbrush and a dentifrice is the most used denture cleaning method. The purpose of this study was to evaluate the abrasiveness of specific and non-specific denture cleaning dentifrices on different heat-polymerized acrylic resins. Sixteen specimens (90 x 30 x 3 mm) of each acrylic resin (QC-20, Lucitone 550, Clássico, Vipi-Cril) were prepared and randomly assigned to...

OBJECTIVES The aim of this study was to assess and compare the water sorption and flexural strength of thermoplastic and conventional acrylic resins. MATERIALS AND METHODS Water sorption and flexural strength were compared between a thermoplastic modified polymethyl methacrylate (PMMA) denture base resin (group A) and a heat-polymerized PMMA acrylic resin (group B) as the control group (n=10)...

th dentistry. Early 20 century sawintroduction of various newer materials like stainless steel, cobalt chromium alloys, acrylic resins(heat cure and self-cure) as DB materials.However, acrylic resin seems to be a material, which got more attention because it fulfils many of the desired properties like ease of processing, favourable working characteristics, accurate fit, stability in oral enviro...

This study evaluated the optical density of two microfilled and two microhybrid resins, as well as the composition of these materials with regard to their optical density. Cavities prepared in 12 2-mm- or 4-mm-thick acrylic plastic plates were filled with Z250 (3M-ESPE), A110 (3M-ESPE), Charisma (Heraeus-Kulzer) and DurafillVS (Heraeus-Kulzer). The resin increments (2-mm-thick) were light-cured...

Background: Traditionally for decades most oral maxillofacial prosthesis were fabricated using heat cured acrylic resin with or without Co-Cr metal base, however, recently polyamide materials that are processed thermally not chemically have been widely promoted for use as the perfect alternative to conventional hard acrylic dentures. The aim of this study was to assess the reaction of human mes...

A single-pass test was used to study the surface failure of commercial and experimental restorative resins and composites. The surface failure observed for unfilled diacrylate resins was more severe than that seen for an unfilled acrylic resin. Addition of nonsilanated filler to the diacrylate resins increased the resistance to penetration but did not dramatically change the mode of surface fai...

OBJECTIVE To evaluate the effect of disinfectants and distilled water on the micro-hardness of heat cure acrylic resins. METHODS The case-control study was conducted at Dr. Ishrat-ul-Ebad Khan Institute of Oral Health Sciences, Dow University of Health Sciences, and Nadirshaw Edulji Dinshaw University of Engineering and Technology, Karachi, from April to October 2011. Specimens were fabricate...