An epoxy-modified urethane rubber mixed with carbon particles is now chosen as the millimeter-wave absorber material in our study. The absorption characteristics of the absorber is measured under temperature changes. The weatherability of our absorber is also clarified based on absorption characteristics, thickness and hardness of the sample. As a result of the temperature characteristics of th...

We investigate the average time for the earliest particle to hit a spherical absorber when a homogeneous gas of freely diffusing particles with density ρ and diffusivity D is prepared in a deterministic state and is initially separated by a minimum distance l from this absorber. In the high-density limit, this first absorption time scales as l D 1 ln ρl in one dimension; we also obtain the firs...

Detection peculiarities of an un-cooled (room temperature) 8×8 pixel array designed to image broadband THz radiation were investigated. Each pixel consists of a thin conductive film absorber on a dielectric membrane with thermopile temperature readout. It was designed and tested for four combinations of two different types of absorber and thermopile materials. The photo-response profile, determ...

Solar thermophotovoltaic (STPV) systems convert solar energy into electricity via thermally radiated photons at tailored wavelengths to increase energy conversion efficiency. In this work, we report the design and analysis of a STPV system with 2D photonic crystals (PhCs) using a high-fidelity thermal-electrical hybrid model that includes the thermal coupling between the absorber/emitter/PV cel...

The energy resolved efficiency of two bolometer detector prototypes for ITER with 4 channels each and absorber thicknesses of 4.5 μm and 12.5 μm, respectively, has been calibrated in a broad spectral range from 1.46 eV up to 25 keV. The calibration in the energy range above 3 eV was performed against previously calibrated silicon photodiodes using monochromatized synchrotron radiation provided ...

Literature about entropy generation analysis of a wavy enclosure is scare. In this paper. a FORTRAN cod using an explicit finite-volume method was provided for estimating the entropy production due to the natural convection heat transfer in a cosine wavy absorber solar collector. The volumetric entropy generation terms both the heat transfer term and the friction term were straightly calculated...

Two-directional differential phase contrast images were measured using an x-ray microbeam and a double wedge absorber. The wedge absorber converts the displacement of an x-ray beam that is refracted by an object into change of x-ray intensity. The double wedge absorber made it possible to detect values of two-directional refraction angle with microrad sensitivity simultaneously. By Fourier inte...

Solar air heater is a type of heat exchanger which transforms solar radiation into heat energy. The thermal performance of conventional solar air heater has been found to be poor because of the low convective heat transfer coefficient from the absorber plate to the air. It is attributed to the formation of a very thin boundary layer at the absorber plate surface commonly known as viscous sub-la...

The first detector prototypes for the ITER bolometer diagnostic featuring a 12.5 μm thick Pt-absorber have been realized and characterized in laboratory tests. The results show linear dependencies of the calibration parameters and are in line with measurements of prototypes with thinner absorbers. However, thermal cycling tests up to 450 °C of the prototypes with thick absorbers demonstrated th...

introduction the significant of solar energy as a renewable energy source, clean and without damage to the environment, for the production of electricity and heat is of great importance. furthermore, due to the oil crisis as well as reducing the cost of home heating by 70%, solar energy in the past two decades has been a favorite of many researchers. solar collectors are devices for collecting ...