deep drawing of cylindrical shapes with high limiting drawing ratio (ldr) values is relatively difficult. annealing is a further operation, which in turn adds costs and consumes significantly time to the forming process. in the present work, cylindrical cups from brass sheet were made with only limited anneal during few steps, but having ldr of 9 that is about 2 times higher than previous works...

Assumption of a linear elastic system under static loading is questionable for structural response analysis of pavement-subgrade systems under dynamic nondestructive testing and moving wheel loads, especially if a deteriorated pavement is under study. Presented are the results of a parametric study using the three-dimensional finite element ABAQUS code; it investigates the effects of pavement d...

ABAQUS provides the-state-of-the-art capabilities in hyperelastic modeling of rubber and other isotropic elastomers. Practical interest, however, is often focused on anisotropic elastomer-like materials (e.g., bio-tissues, cord-rubber composites, reinforced polymers, etc.) where properties in various directions are significantly different. The present paper considers a general constitutive mode...

In this study, the hydrogen transport phenomenon was numerically evaluated by using hydrogen-enhanced localized plasticity (HELP) mechanisms. Two dominant governing equations, namely, the hydrogen transport model and the elasto-plastic model, were introduced. In addition, the implicitly formulated equations of the governing equations were implemented into ABAQUS UMAT user-defined subroutines. T...

The automotive industry has increased significantly the use of advanced high strength steels (AHSS) in many structural components, with the aim to reduce weight and also to increase safety. The high resistance of these steels is accompanied by a decrease in formability, which makes simulation a requirement to adequately foresee the formability of a particular stretch formed component. This work...

Abstract: The latest release of Abaqus version 6.10 includes Abaqus/CFD. The inclusion of this software makes it possible for users to perform a fluid analysis in a more user-friendly manner. Independent single software solely for CFD is currently available from many developers, and many attempts have been made to link software of CFD to structural analysis system using some specific procedures...

AET (acoustic emission tomography) is a new visualization location method for inspecting and locating the internal damages in the structures. In this paper, the AET is applied to detect and visualize damage source locations in the Q235B steel structure to validate its effectiveness. Firstly, the ABAQUS/Explicit simulation model of the steel structure with one damaged circle in its center is bui...

In this paper, inhomogeneous deformation of a temperature-sensitive hydrogel has been studied and analyzed under arbitrary geometric and boundary conditions. We present the governing equations and equilibrium conditions of an isothermal process based on the monophase gel field theory of hydrogel via a variational approach. We have adopted and implemented an explicit form of energy for temperatu...