The microstructural evolution, deformation mechanism and mechanical properties of Fe-25Mn-3Si-3Al-0.3Nb steel in the process cold rolling were studied by optical microscopy, scanning transmission electron X-ray diffractometry, tensile testing microhardness tests. A high-density dislocation structure a small number strain-induced twins appeared microstructure at 30% strain. At 50% strain, austen...

Lateral resistance of railway track is one of the most important parameters in lateral stability. This parameter depends!on the conditions of different components of ballasted railway track (such as density of ballast layer, sleeper spacing, type of sleeper, etc.). From this perspective, type of sleeper has an important effect on lateral resistance. However in some conditions, in technical and ...

The mode of operation of mini parabolic solar panels made of germanium, mild steel and aluminium were investigated experimentally, as means of providing heated water on a farmland; the process was also modelled. Angular adjustments of the solar collectors from 70-90o were adopted in order to determine, the best material of construction for the parabolic solar collector and the angular orientati...

The lack of complete understanding of the substrate effects on carbon nanotubes (CNTs) growth poses a lot oftechnical challenges. Here, we report the direct growth of nanostructures such as the CNTs on stainless steel 304and brass substrates using thermal chemical vapor deposition (TCVD) process with C2H2 gas as carbon sourceand hydrogen as supporting gas mixed in Ar gas flow. We used an especi...

Small angle neutron scattering (SANS) was used to quantify the precipitate characteristics (i.e., mean precipitate size, number of precipitates, and distribution broadening) in X-70 and X-80 pipeline steel and in grades 80 and 100 microalloyed steel plate. The precipitate distributions measured for the different steels were correlated with the finish rolling temperature (FRT) and cooling interr...

A self-developed rotary multi-cutter device cuts stainless steel wire ropes into segments to fabricate twisted wires. Stainless steel porous twisted wire materials (PTWMs) with a spatial composite intertexture structure are produced by the compaction and subsequent vacuum solid-phase sintering of twisted wires. The stainless steel PTWMs show two types of typical uniaxial tensile failure modes, ...

Orthodontic bands are retained on the crowns o f teeth by the luting action o f the cement. Studies by several work­ ers have demonstrated the inability o f zinc phosphate cements to produce an effective marginal seal and have shown microleakage to occur along the walls o f cavities restored with zinc phosphate cements. Differences in the coefficients o f thermal expansion between enamel, denta...