Indentation hardness has been used extensively for material characterization and many recent computational studies have established quantitative relationships between elasto-plastic mechanical properties and the response in instrumented indentation. In contrast, very few studies have systematically quantified the effect of the plastic deformation characteristics on the frictional sliding respon...

in this article, the elasto-plastic analysis of thick walled fg tanks subjected to internal pressure is elaborated. today, thick walled tanks containing liquids with high pressure are used in the chemical industries. the high internal pressure causes part of the thickness of reservoir to yield; therefore, we need the elasto-plastic analysis. in this study, elasto-plastic behavior of fg cylindri...

The study of deformations in dynamically and thermally loaded elastic solids has important applications in engineering. A wide literature exists on the numerical solution of dynamic thermo-elasticity problems via finite element methods (FEM). These methods include Laplace-transform FEMs and semi-discrete methods, whereby finite elements are used in space and finite differences are used in time....

We show elasto-capillary folding of silicon nitride objects with accurate folding angles between flaps of (70.6 ± 0.1)° and demonstrate the feasibility of such accurate micro-assembly with a final folding angle of 90°. The folding angle is defined by stop-programmable hinges that are fabricated starting from silicon molds employing accurate three-dimensional corner lithography. This nano-patter...

This paper presents a novel interface element for the geometric and material nonlinear analysis of unreinforced brick-masonry structures. In the proposed modelling approach, the blocks are modelled using 3D continuum solid elements, while the mortar and brick-mortar interfaces are modelled by means of the 2D nonlinear interface element. This enables the representation of any 3D arrangement for ...

The importance of fibre reinforced plastics continually increases due to the excellent mechanical properties, low material and manufacturing costs combined with significant weight reduction. Today, components are usually designed and calculated numerically by using finite element methods (FEM) to avoid expensive laboratory tests. These programs are based on material models including material sp...

The recent developments in measurement technology have led to the installation of efficient monitoring systems on many bridges and other structures all over the world. Nowadays, more and more structures have been built and instrumented with sensors. However, calibration and installation of sensors remain challenging tasks. In this paper, we use a case study, Adige Bridge, in order to present a ...

During heat treatment, the work piece experiences a range of heating rates depending upon the sizes and types of furnace. When the Al-Si-Mg cast alloy is heated to the solutionizing temperature , recrystallization takes place during the ramp-up stage. The effect of heating rate on recrystallization in the A356 (Al-Si-Mg) alloy was studied using dilatometric and calorimetric methods. Recrystalli...

This paper presents a criterion for detecting diffuse (homogeneous) instabilities in granular soils sheared under fully drained conditions. The criterion is based on bifurcation theory and applied to elasto-plasticity by allowing multiple incremental solutions in elasto-plastic soils, physically losing controllability of stress boundary conditions. Drained diffuse instabilities are poorly under...

An elasto-magnetic (EM) and magneto-electric (ME) effect based elasto-magneto-electric (EME) sensor has been proposed recently by the authors for stress monitoring of steel cables with obvious superiorities over traditional elasto-magnetic sensors. For design optimization and engineering application of the EME sensor, the design theory is interpreted with a developed model taking into account t...