In order to further enhance tribological properties 316 Low carbon stainless steel (L SS) used on mechanical parts. CrN/TiN with DC magnetron sputtering sources was carried out on PVD 316 L SS. The micro structure of the CrN/TiN coatings were investigated by Scanning electron microscope (SEM), X-ray Diffraction (XRD) and tribology properties were investigated on a Pin on Disc friction and wear ...

Intergranular stress corrosion cracking has occurred in BWR environments in non-sensitised, cold-worked austenitic stainless steel materials. The affecting parameters are so far not fully known, but deformation mechanisms may be decisive. The effect of cold deformation and nitrogen content on the deformation behaviour of austenitic stainless steels was investigated. The materials were austeniti...

Type 316L stainless steel particles were pseudo-sensitized by being heated at 700 degrees C for 100 h under a reduced pressure of 1.3 x 10(-3) Pa. Pseudo-sensitization treatment resulted in the formation of chromium-rich precipitates at the outermost surfaces of the stainless steel particles. The curve for the apparent surface charge density (sigma app) of the pseudo-sensitized particles showed...

The objectives of this work are to study Laser Engineered Net Shaping (LENS TM ) produced materials and identify the microstructures. Numerical method was used to examine the influence of materials’ type and LENS TM process parameters on the forming of the specific microstructures from thermodynamics and fluid dynamics point of view. Samples of 316L stainless steel were examined, microstructure...

The effects of anisotropy during mixed mode fatigue crack growth were studied in single crystal 316L stainless steel. An anisotropic least-squares regression algorithm using displacements from digital image correlation was developed to find the effective stress intensity factors, KI and KII, and the T-stress. Crack tip plastic zones were determined using an anisotropic yield criterion. Strains ...

The corrosion and cell viability behaviors of nanostructured, nickel-free stainless steel implants were studied and compared with AISI 316L. The electrochemical studies were conducted by potentiodynamic polarization and electrochemical impedance spectroscopic measurements in a simulated body fluid. Cytocompatibility was also evaluated by the adhesion behavior of adult human stem cells on the su...

Release of nickel from nickel or nickel-plated metals, is often responsible for allergic contact dermatitis. However, the effect of nickel-bearing stainless steels is not weil known. ln this paper AISI 304, 316 and 430 type stainless steels, as weil as nickel and nickel-plated materials, are investigated. Three tests were carried out: electrochemical tests and leaching experiments in sodium chl...

Palladium-based membranes are attractive for their nearly perfect permselectivity to hydrogen. Membrane modules, consisting of a membrane foil, porous stainless steel substrate, test frame and flange were assembled and tested in an electrically heated vessel. Instantaneous hydrogen permeation flux was measured. Influences of operation conditions on the membrane performance were examined. Micros...

The chemical composition, nanostructure and electronic structure of nanosized oxide scales naturally formed on the surface of AISI 316L stainless steel microfibres used for strengthening of composite materials have been characterised using a combination of scanning and transmission electron microscopy with energy-dispersive X-ray, electron energy loss and Auger spectroscopy. The analysis reveal...