This work explores the effect of surface modification of stainless steel with a carbon nitride (CNx) film, under sliding wear of the UHMWPE/steel. Wettatibility of CNx coatings is assessed by means of the sessile drop method using two different liquid media. Microhardness and stiffness of CNx coatings are estimated by depth-sensing indentation. The sliding performance of UHMWPE against stainles...

We report on the first encapsulated rotary ball bearing mechanism using silicon microfabrication and stainless steel balls. The method of capturing stainless steel balls within a silicon race to support a silicon rotor both axially and radially is developed for rotary micro machines and MEMS ball bearing tribology studies. Initial demonstrations show speeds up to 6.8 krpm without lubrication, w...

Barrier layer material deposited on stainless steel substrate has been under investigation. These layers are part of a film-Si module, presently under development at ECN. Low temperature (< 250°C) processing is required in order to avoid impurity diffusion from the stainless steel foil. Novel materials based on nano particles combined with organic/ inorganic polymers and SiOx precipitated from ...

We investigated the wear characteristics and clinical performance of four different total hip joint articulations in 114 patients. Wear and migration was measured by roentgenstereophotogrammetric analysis at five years or at the last follow-up. The mean annual wear was 0.11 mm for a stainless steel/Enduron articulation, 0.34 mm for stainless steel/Hylamer cup, 0.17 mm for zirconium oxide cerami...

driver (Figure 1), is made from stainless steel and is used to hold a suturing needle during surgical procedures. To maintain a firm grip on the needle, the jaws have textured patterns either etched directly on the stainless steel or on a replaceable tungsten carbide insert, which grips the suture needle more precisely and wears out much slower than stainless steel. Needle holders with tungsten...

Stainless steel has been employed in many engineering applications ranging from pharmaceutical equipment to piping in the nuclear reactors and storage to chemical products. In this attempt, simulation of fatigue crack growth based on experimental results of austenitic stainless steel 304L was presented using AFGROW code when NASGRO mode laws adopted. Double through crack at hole specimen is use...

background: one of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. this study evaluated the effect of electric spot welding on the load defl ection rate of stainless steel and chromium-cobalt orthodontic wires. materials and methods: in this experimental-laboratory study, load defl ection rate of 0.016 ×...

Stainless steel has been employed in many engineering applications ranging from pharmaceutical equipment to piping in the nuclear reactors and storage to chemical products. In this attempt, simulation of fatigue crack growth based on experimental results of austenitic stainless steel 304L was presented using AFGROW code when NASGRO mode laws adopted. Double through crack at hole specimen is use...

The aim of this work is to determine the fatigue life of 316L stainless steel. The mechanisms of fatigue of 316L stainless steels were investigated and discussed. The fatigue tests were carried out at constant-amplitude cyclic loading with load ratio R=0.1. Scanning Electron Microscope (SEM) is then used to examine the fracture surface. The results show that the fatigue limit of 316L stainless ...

INTRODUCTION Intravascular coronary stenting has been used in the treatment of coronary artery disease (CAD), with a major limitation of in-stent restenosis (ISR). The 316 stainless steel has been widely used for coronary stents. In this study, we developed a novel coating method to reduce ISR by simultaneously coating vascular endothelial growth factor (VEGF) and anti-CD34 antibody on 316L sta...