Al2O3 and Al2O3-ZrO2 coatings were deposited on stainless steel using atmospheric plasma spraying. The influence of arc current zirconia addition the surface morphology coating, phase composition tribological properties under dry sliding conditions investigated. reduced roughness coatings. X-ray diffraction measurements indicated that composed β-Al2O3, α-Al2O3, γ-Al2O3 phases. led to formation ...

The properties of 20 wt % CeO2 and 21 wt % Ce0.5Zr0.5O2 films, deposited onto a γ-Al2O3 by Atomic Layer Deposition (ALD), were compared to bulk Ce0.5Zr0.5O2 and γ-Al2O3-supported samples on which 20 wt % CeO2 or 21 wt % CeO2–ZrO2 were deposited by impregnation. Following calcination to 1073 K, the ALD-prepared catalysts showed much lower XRD peak intensities, implying that these samples existed...

In this paper, overall heat transfer coefficient and friction factor of water based γ-Al2O3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. For better dispersion of γ-Al2O3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kW and frequency of 35 kHz) were implemented. The stabi...

Highly meso-porous Pt contained γ-Al2O3 nanostructure was prepared by a combined sol gel-pyrolysis method in the presence of polyvinylpyrrolidone and Pluronic p123 as surfactant. The surface of the prepared nanostructure was decorated with 1-Butyl-3-methylimidazolium hexafluorophosphate ([BMM]PF6) ionic liquid to enhance the sorption capacity and prevent the poisoning of the catalytic active si...

Synthesis of organic compounds using nano-catalysts is more and more attention due to the numerous advantages such as cost-effectiveness, high catalytic activity, ease of product separation, recovery of the catalyst, repeated recycling potential and good stability. In this work, TiCl2/nano-γ-Al2O3, as a novel type of green heterogeneous solid acid was prepared by the immobilization of TiCl2 on ...

Pyrolysis is an applicable method that has been widely used to recover hydrocarbons from Used Lubricating Oil (ULO). However, large-scale application of this approach has been limited by its noticeably energy and time consuming nature. In the present research, it has been attempted to modify the energy and time requirements of ULO pyrolysis using the catalytic effects of metal oxide nanoparticl...

. The nature of the formation allene and methylacetylene during dehydrochlorination 1,2-dichloropropane intermediate products (1-chloropropene-1, 2-chloropropene-1, 2-chloropropane, 3-chloropropene-1) on γ-Al2O3, CaX expanded clay made it possible to establish that main source is - 1-chloropropene-1, γ -Al2O3, appears mainly from 2-chloroprene. highest value allene: ratio was obtained 1,2-dichl...

Hydrogen production from biomass has been paid more attention for years. Processes suggested for production of hydrogen from biomass are often involved in high-temperature pyrolysis, catalytic steam reforming or enzymatic biosynthesis. These strategies, however, encounter problems of high consumption of energy, low catalyst efficiency and very limited productivity. Group VIII metals such as Pt,...

Pyrolysis is an applicable method that has been widely used to recover hydrocarbons from Used Lubricating Oil (ULO). However, large-scale application of this approach has been limited by its noticeably energy and time consuming nature. In the present research, it has been attempted to modify the energy and time requirements of ULO pyrolysis using the catalytic effects of metal oxide nanoparticl...