In the application of UREX+1 process, technetium will be separated together with uranium and iodine within the first process step. After the separation of uranium, technetium and iodine must be immobilized by their incorporation in a suitable waste storage-form. Based on recent activities within the AFCI community, a potential candidate as waste storage form to immobilize technetium is to alloy...

industries, its nuclear properties in the pure metallic form make it highly desirable for nuclear applications. Zr is highly corrosion resistant and has a high melting point (2128 K) with a low thermal neutron absorption cross-section of Zr T = 0.18 b, which is significantly smaller than that of hafnium Hf T =115 b) (Speer, 1982), an element that coexists with Zr in nature. This makes Zr ideal ...

In the present study, novel MRI compatible zirconium-ruthenium alloys with ultralow magnetic susceptibility were developed for biomedical and therapeutic devices under MRI diagnostics environments. The results demonstrated that alloying with ruthenium into pure zirconium would significantly increase the strength and hardness properties. The corrosion resistance of zirconium-ruthenium alloys inc...

A large-scale ingot of Zr-1Mo alloy was produced for industrial manufacturing to investigate whether it is possible to produce an ingot with homogeneity. The homogeneous ingot with a chemical composition of Zr-1mass%Mo was prepared successfully. The microstructure, mechanical properties, and magnetic susceptibility were evaluated. The microstructure showed a coarse colony structure of a plate-l...

We present the results of in-situ studies of evolution of grain boundary misorientations in ultrafine grained (UFG) aluminum alloy Al-4 Cu-0.5 Zr (wt%) during annealing. The structure of the UFG alloy was obtained by severe plastic deformation method. Misorientations between the grains were measured using single reflection technique. It was found that relaxation processes during annealing are a...

We present investigations on the plastic deformation behavior of a brittle bulk amorphous alloy by simple uniaxial compressive loading at room temperature. A patterning is possible by cold-plastic forming of the typically brittle Hf-based bulk amorphous alloy through controlling homogenous flow without the need for thermal energy or shaping at elevated temperatures. The experimental evidence su...

Zinc and zirconium were selected as the alloying elements in biodegradable magnesium alloys, considering their strengthening effect and good biocompatibility. The degradation rate, hydrogen evolution, ion release, surface layer and in vitro cytotoxicity of two Mg-Zn-Zr alloys, i.e. ZK30 and ZK60, and a WE-type alloy (Mg-Y-RE-Zr) were investigated by means of long-term static immersion testing i...

As shown in the preceding chapter, simple binary eutectic Ni-Hf and Ni-Zr braze alloys can be used to successfully join In738 Ni-base superalloy. The joint gap must, however, be narrow (less than 0.15 mm in width) to allow capillary action to draw the filler metal into the joint. Such narrow joint gaps are usually only found in the manufacturing industry. In the repair industry, especially in I...

Vibrating-reed measurements of the hydrogen internal friction peak were performed on a series of CO-Zr glasses ranging from C O ~ ~ Z ~ ~ ~ to Co24Zr76 Variations in peak shape and growth behaviour (on increasing the H concentration) were observed for different alloy compositions, together with an increase of the average activation energy with cobalt concentration. These fmdings can be explaine...

The high-entropy configuration of equiatomic multicomponent alloys opens an effective access to the development of advanced materials. Here we report the synthesis of a new quinary refractory WMoTaNbZr high-entropy alloy under electrostatic levitation condition. It showed a high liquidus temperature of 2686 K and achieved a maximum supercooling of 640 K (0.24 TL) at molten state. The containerl...