In the present study, solid oxide cells (SOCs) were operated in electricity generation (solid fuel cell, SOFC) mode and hydrogen production electrolysis SOEC) mode. The electrodes fabricated with nickel-gadolinia doped ceria (Ni-GDC) nickel-yttria stabilized zirconia (Ni-YSZ) composites investigated. correlations between changes microstructure degradation of electrochemical performance are disc...

Authors reported an effective path to increase the electrical conductivity while to decrease the thermal conductivity, and thus to enhance the ZT value by nano-inclusions. By this method, the ZT value of Nb-doped SrTiO3 was enhanced 9-fold by yttria stabilized zirconia (YSZ) nano-inclusions. YSZ inclusions, located inside grain and in triple junction, can reduce the thermal conductivity by effe...

Introduction Electrochemically induced oxygen diffusion on electrode surfaces plays an important role in solid state electrochemistry, especially in the context of electrochemical promotion of catalysis (EPOC), also referred to as non-faradaic electrochemical modification of catalytic activity (NEMCA) [1]. The Pt(O2)|YSZ system is a model system in solid state electrochemistry as well as for EP...

The properties of plasma sprayed Y-Ba-Cu-O coatings deposited on metallic substrates are studied. Stainless steel, nickel steels and pure nickel are used as substrate. Y-Ba-Cu-O deposited on stainless steel and nickel steel reacts with the substrate. This interaction can be suppressed by using an yttria-stabilized zirconia (YsZ) diffusion barrier. However, after heat treatment the Y-Ba-Cu-O lay...

A cermet (ceramic metal composite) of Nickel and Yttria stabilized Zirconia (YSZ) is the most commonly used fuel electrode for Solid Oxide Fuel Cells (SOFC). The properties of such cermets depend strongly on their microstructure. Several Ni/YSZ cermet samples with different Ni content and Ni and 8YSZ grain size have been prepared. The thermal expansion coefficient (TEC) of these samples was mea...

Although liquid lead-bismuth eutectic (LBE) is a good candidate for the coolant in the subcritical transmutation blanket, it is also known to be very corrosive to stainless steel, the material of the carrying tubes and the containers. Such a corrosion problem can be prevented by producing and maintaining a protective oxide layer on the exposed surface of stainless steel. Proper formation of the...

Ruthenium-Carbon (Ru-C) nano-composite films were prepared by plasma-enhanced chemical vapor deposition (PECVD) and the effects of deposition conditions on the microstructure and electrical properies were investigated. The films consisted of agglomerated grains of 10 to 20 nm in diameter, in which Ru particles of 2.5 to 3.5 nm in diameter were dispersed in a C matrix. The C content of the films...

Porous yttria-stabilised zirconia ceramics have been gaining popularity throughout the years in various fields, such as energy, environment, medicine, etc. Although yttria-stabilised zirconia is a well-studied material, voided yttria-stabilised zirconia powder particles have not been demonstrated yet, and might play an important role in future technology developments. A sol-gel synthesis accomp...

Yttria-stabilized zirconia (YSZ) has been used as a thermal/environmental barrier coating for gas turbine engine blades. Current methods of fabrication include air plasma spraying (APS) and electron-beam physical vapor deposition (EB-PVD). The APS technique results in a coating that loses effectiveness with thermal cycling. The EB-PVD technique deposits a columnar microstructure which accommoda...

Transmission electron microscopy (TEM) is a very powerful technique for materials characterization, providing information relating to morphology, composition, and crystal structure. Selected area diffraction patterns (SADPs) are crystallographic data that can be obtained using a TEM instrument. Conventional identification through SADP/TEM is tricky and tedious, thereby increasing the difficulty...