This paper defines a PID type yarn tension control run by a PLC system that is used to control the yarn tension below the twisting head of the novel air jet texturing and twisting (AJT) machine. In the standard sequence of the AJT, if the yarn is transported to the twisting and winding head with a low tension value, the yarn is bound to wrap around the shoulder below the twisting head and break...

Relative performance of the back propagation neural network (BPN) algorithm combined with genetic algorithm (GA) approach for the prediction/optimization of the properties of yarn produced on jet ring spinning system has been studied. Yarn samples of various linear densities have been produced on ring spinning machines using air-jet nozzles as retrofit by varying the nozzle parameter and the ya...

Twisting is an important process to form a continuous yarn from short fibres and to determine the structure and properties of the resultant yarn. This paper proposes a new theoretical model of yarn dynamics in a generalized twisting system, which deals with two important phenomena simultaneously, that is, twist generation and twist propagation. Equations of yarn motion are established and the b...

This study of woven fabric strength begins by focusing on the effects of the crossing points, where warp and weft yarns interlace with each other to form a fabric, towards the ultimate fabric tensile strength. When a fabric is under uniaxial or biaxial tension, the yarn-yarn interactions at the crossing points are found to consist of two components, a pressure-independent adhesive component and...

Textile composites are widely used in automotive, naval, and aerospace industries. The variation of the topology of the textile structure will affect the performance of the composite. The yarn micro-geometry is determined by 1) the textile process, such as weaving, braiding, etc. and 2) the composite forming process, such as vacuum bagging, resin transfer molding, etc. In this paper, we present...

Five layers, i.e. floss, upper, middle, lower and pelade, exist in cocoon shell from outer to inner portion. An attempt has been made for assessment of microstructural characteristics eri silk fiber different layers cocoons. Wide angle x- ray diffraction revealed increase crystallinity as well degree orientation decrease crystal size besides lattice spacing remains at par floss pelade layers. S...

SHANKAM NARAYANA, VIVEK PRASAD. Novel Method for Dynamic Yarn Tension Measurement and Control in Direct Cabling Process. (Under the directions of Dr. William Oxenham, Dr. Abdelfattah Seyam and Dr. Edward Grant). Yarn tension control is an important parameter for quality and efficiency in textile processes. It has a significant influence on productivity in various processes such as winding, twis...

Cotton knitted fabrics were manufactured with different yarn types (conventional ring spun yarn and torque-free ring spun yarn) with different fibre types (combed cotton and combed Supima cotton) and yarn fineness (Ne30 and Ne40). These fabrics were then dyed with three types of dye (reactive, direct and sulphur dye) with three dye concentrations (0.1%, 1.0% and 5.0% on-weight of fabric (owf)) ...

the nylon and nylon/lycra yarns were coated with electrically conductive polymers such as polyaniline and polypyrrole, via chemical polymerization process. electrical conductivity of the coated yarns was measured at variousstrain levels using two-point probe technique and their strain sensitivities were studied. the results showed that, electrical conductivity of the coated yarns decreased with...

Air-jet weaving is an advanced weaving method with high efficiency and productivity. It is one of the most widely used methods of weaving in the world. In air-jet filling insertion, the motion of weft yarn is caused by friction between weft yarn and air blown through nozzle. After declamping and subjecting the yarn to air stream, its motion is not active but very complicated and influenced by ...