An innovative laser-vision-based sensing method is proposed to measure weld pool oscillation frequency in pulsed gas tungsten arc welding (GTAW-P). A low-power five-line laser pattern is projected onto the entire weld pool surface as well as its reflection is intercepted by an imaging plane and captured by a high-speed camera. By observing and analyzing the change of the captured laser images d...

The authors of this experimental research work have made an attempt to experimentally investigate the ultimate flexural load of ferrocement slabs of size 700mm. X 200mm. X 15mm. (thickness) reinforced with PVC coated steel weld mesh, and compare the results with slabs using GI-coated steel weld mesh, by varying the number of layers from 1-3. Ordinary Portland Cement, locally available river san...

Evaluation of residual stress in the weld toe region is of critical importance. In this paper, the residual stress distribution both near the surface and in depth around the weld toe was investigated using neutron diffraction, complemented with X-ray diffraction. Measurements were done on a 1300 MPa yield strength steel welded using a Low Transformation Temperature (LTT) consumable. Near surfac...

-S 169 WELDING JOURNAL ABSTRACT. A 3-D transient numerical model was developed for simulation of gas metal arc (GMA) weld pools with free surface and droplet impact effects. This effort predicted a moving GMA weld pool by considering not only the heat transfer and fluid flow driven by surface tension gradient, electromagnetic force, buoyancy, and arc pressure, but also detailed information abou...

Girth weld cracking is one of the main failure modes in oil and gas pipelines; girth weld cracking inspection has great economic and social significance for the intrinsic safety of pipelines. This paper introduces the typical girth weld defects of oil and gas pipelines and the common nondestructive testing methods, and systematically generalizes the progress in the studies on technical principl...

Laser-based ultrasonic (LBU) measurement shows great promise for on-line monitoring of weld quality in tailor-welded blanks. Tailor-welded blanks are steel blanks made from plates of differing thickness and/or properties butt-welded together; they are used in automobile manufacturing to produce body, frame, and closure panels. LBU uses a pulsed laser to generate the ultrasound and a continuous ...

Quality of welded joint at MAG welding process depends of numbers of influences, like type and thickness of base metal, groove type, welding position etc., but the proper selection of welding parameters is also very important. Due to that, the analysis of weld bead geometry at MAG welding process with regard to weld current, voltage and weld speed (heat input) and the type and shielding gas flo...

Process monitoring is important for the laser welding system, especially for the weld seam deviation monitoring. A 10kW high power fiber laser butt joint welding of type 304 stainless steel was performed. By combing two different band pass filters, high speed photography was employed to capture the near-infrared images of molten pools. Image difference algorithm was used to obtain the weld seam...