The use of a granular inoculum prevented acidification during the anaerobic batch biodegradation of a kitchen waste for waste/inoculum ratios in the range of 0.5–2.3 g VS/g VS, when the alkalinity/COD ratio was 37 mg NaHCO3/g COD. In similar experiments but using a suspended sludge with a significantly lower activity, the methane production rates and the biodegradability were significantly lowe...

In recent years many researchers show a high interest in co-digestion, simultaneous anaerobic decomposition of a homogenous mixture of at least two biodegradable waste. Anaerobic codigestion is reported to offer several benefits over digestion of separate materials, such as increased cost-efficiency, increased biodegradation of the treated materials, as well as increased biogas production. Most...

Under anaerobic conditions, organic pollutants in wastewater are degraded by microbes producing methane and carbon dioxide. The degradation process is effective compared to the more conventional aerobic processes and produces only 5-10% of sludge. This saves considerably on cost associated with the sludge disposal. Among anaerobic technologies, the most popular ones is the upflow anaerobic slud...

For a sustainable municipal sewage sludge management, not only the available technology, but also other parameters, such as policy regulations and socio-economic issues should be taken in account. In this study, the current status of both European and Greek Legislation on waste management, with a special insight in municipal sewage sludge, is presented. A SWOT analysis was further developed for...

The kinetics of phosphate adsorbed on waste iron sludge was investigated in this study. Static batch adsorption experiments were performed at different initial phosphate concentrations, initial pH and temperature of solution. The initial adsorption rate increased with increasing the phosphate concentration. A shorter time, however, was required to reach adsorption equilibrium at low phosphate c...

Leather processing is an important industry in China, and the discharge of chromium waste has been severely circumscribed. Though traditional processes for treating chromium waste have been widely used in tannery plants, technology adopting high efficiency and economic simultaneously is deficient. In order to develop an economic treatment for tannery waste, a mixed alkali of sodium hydroxide an...

Human health concerns and the dissemination of anthropogenic substances with unknown consequences are the reasons most often given why disposal of municipal sewage sludge in landfills or using the organic waste as biofuel is preferable to land application. But no "fertilizer" causes more nitrogen pollution than sludge when applied according to Virginia law. Poultry litter is the only other "fer...

The European directive 2000/53/EC implies a "reuse and recovery" rate for end-of-life vehicles (ELVs) of 95% to be reached by the year 2015. One of the options to increase the actual average European "reuse and recovery" rate of approximately 78% (EU 15, 2008) is incineration of automotive shredder residue (ASR) with energy-recovery. The mass balance and the congener fingerprints for PCDD/Fs, d...

Denitrification of synthetic high nitrate waste containing 9032 ppm NO(3)-N (40,000 ppm NO(3)) in a time period of only 6h has been achieved in our previous study using activated sludge. The activated sludge culture was acclimatized by a stepwise increase in the nitrate concentration of synthetic waste. In the present work, studies were carried out on the changing microbial population of the sl...

WARREN H. CHESNER Chesner Engineering, P.C. This paper presents an overview of a recently pat­ ented technology which defines the process of using selected waste products to assist in reclaiming existing municipal solid waste landfill sites [1]. The process in­ volves the pressurized injection of these materials into the void spaces of existing landfill sites to both manage the waste product an...