Usually ultrasonic techniques tend to evaluate the closed cracks as smaller than the actual size. In this paper, we describe two strategic techniques for accurately evaluating the closed cracks by means of ultrasound. First, we show the advanced technique utilizing the thermal stress induced by cooling a cracked part. It is shown that a small amount of temperature decrease is effective to open ...

The finite displacement formulation of a quadrilateral element containing an embedded displacement discontinuity is presented. The formulation is based on the kinematically optimal technique, and some known defects of this technique are addressed. Lagrange multipliers are adopted to ensure the correct crack closure prior to initiation. Six additional degrees of freedom in each element allow the...

In this paper, the plates made of functionally graded material (FGM) with and without a crack are numerically simulated, employing the finite element method (FEM). The material property variations are defined to be fully continuous; therefore, the elements can be as small as required. For this purpose, variations of the material properties are applied in both the integration points and in the n...

using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. in the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...

Fatigue-crack-growth (FCG) rate tests were conducted on compact specimens made of an Inconel-718 alloy to study the behavior over a wide range in load ratios (0.1 6 R 6 0.95) and a constant Kmax test condition. Previous research had indicated that high R (>0.7) and constant Kmax test conditions near threshold conditions were suspected to be crack-closure-free and that any differences were attri...

The assessment of fatigue crack propagation steel structures is essential and important especially to improve the application high strength in construction. load ratio R, reflecting mean stress effects, will be changed with extension complicated geometry. In this paper, Walker equation employed fit rate grades S355 S690 based on experimental data literature incorporate effects. material paramet...

structural health monitoring of cracked structures is one of beloved subject of researchers recently. consider of crack behavior in the water and energy pipeline is important because of environmental problems. in this paper consider of crack parameters in the underwater pipe subjected to mechanical transient load is investigated. for this purpose, three- dimensional parametric model of cracked ...

Interest in extending the high cycle fatigue life of structures has increased in the last decade of the 20th century. Since a long fatigue life depends on keeping cyclic loads near or below the fatigue threshold, understanding near-threshold behavior is now all the more important. This paper reviews the status of the ‘threshold of fatigue’ and to a lesser extent its relation to the ‘fatigue lim...

A long matrix crack in a unidirectional bre{reinforced composite, perpendicular to the bre direction and subjected to Mode{I loading, is considered. The intact composite material is modelled as homogeneous linearly elastic and the bridging bres are replaced by restraining tractions acting on the crack surfaces. The problem is formulated in terms of a hypersingular integral equation with respect...