Researches into the relationship between the physical quantity of vibration and the subjectively perceived quantity become important in designs for the vibration environment. Subjective experimental methods to obtain the relationship between the physical quantity of vibration and the subjectively perceived quantity are different depending on the design objectives which consider the human sense ...

this paper presents a reduce roll vibration of the full vehicle model with passive suspension systems using vibration absorber to change the dynamic system matrix stat’s eigenvalue. since using the controller system has been splurged and required to energy consuming, in this research the vehicle body roll vibration has been reduced and supplied vehicle stability using a vibration absorber for t...

In this work, a large-scale Brushless Doubly Fed Machine (BDFM) built in frame size D400 is tested at different operating conditions in order to examine its noise and vibration levels. A series of measurements were conducted on the machine to establish the main modes of excitation of vibration and noise developed by the machine. The harmonic spectrums of the vibration amplitudes are presented a...

BACKGROUND About 20 to 50 percent of accidents are due to some forms of carelessness and mindedness. Studies suggested that vibration is one of the most important physical factors in human performance when traveling on any sort of vehicles. The aim of this study was to investigate the effect of vehicles vibration on cognitive performance (attention and concentration). METHODS The sample consi...

[Purpose] Sclerostin is mechanosensitive protein that is produced exclusively by osteocytes. It was reported that the plasma sclerostin level increases in the 10th minute after the application of Whole-Body Vibration. The aim of this study was to determine whether single extremity-vibration induces any change in the serum sclerostin level. [Subjects and Methods] Eight healthy young-adult volunt...

It might be assumed that increasing the thickness of a glove would reduce the vibration transmitted to the hand. Three material samples from an anti-vibration glove were stacked to produce three thicknesses: 6.4, 12.8 and 19.2 mm. The dynamic stiffnesses of all three thicknesses, the apparent mass at the palm and the finger and the transmission of vibration to the palm and finger were measured....

in this paper, the effects of transverse cracks on rotating shaft were studied. according to earlier works, crack shaft failure decrease the critical speed of the shaft and also exhibit a nonlinear vibration behaviour leading to increases the amplitude of 1x and 2x harmonics (first and second order of rotational speed in torsional vibration). this suggests that the application of order analysis...

foam injection is widely applied in amounts of fields to drilling, production, and formation protection. sometimes, the application result is disappointing, which is caused by the failure of bubble generation in foam flooding. therefore, it is necessary to seek ways for improving the performance of foam injection. an increased disturbance to the stratum, like the vibration caused by a seismic o...

In the various working field, vibration may cause injurious to human body. Especially, in case of the vibration which is constantly and repeatedly transferred to the human. That gives serious physical problem, so called, Reynaud phenomenon. In this paper, we propose a vibration transmissibility reduction module with flexure mechanism for personal tools. At first, we select a target personal too...

The vibration control of a construction vehicle must be carried out in order to meet the aims of sustainable environmental development and to avoid the potential human health hazards. In this paper, based on market feedback, the driver seat vibration of a type of wheel loader in the left and right direction, is found to be significant over a certain speed range. In order to find abnormal vibrat...