Because of its unique properties, titania (TiO2) represents a promising candidate in a wide variety of research fields. In this paper, some of the properties and potential applications of titania within rolled-up nanotechnology are explored. It is shown how the structural and optical properties of rolled titania microtubes can be controlled by properly tuning the microfabrication parameters. Th...

Black titania prepared by metal-reduction methods is systematically studied and found the best controllable Mg-reduction method. Colored titania products from white, light blue, dark blue, to black were obtained with a crystalline/amorphous core-shell structure. The black titania shows a five times higher H2 production rate in photoelectrochemical (PEC) water splitting.

In this research, two series of ultra-low cement high alumina refractory castables containing 0 and 0.4 wt.% of nano-titania were prepared using different amounts of polycarbonic acid (DOLAPIX FF 26) as a dispersant. Several characteristics including microstructure, flowability, mechanical strength, bulk density and apparent porosity of the samples were analyzed. The results showed that the opt...

This project is an extension of TEM work conducted on a previous AINSE funded project AINGRA08066, and aims to use the TEM, STEM/HAADF, EDS and plasmon imaging facilities at ANSTO to structurally characterize novel supported silver nanoparticle catalysts for ozone abatement, and supported gold catalysts for low temperature CO oxidation. The catalysts, fabricated at the University of Auckland, c...

An analysis of the steady mixed convection boundary layer flow past a vertical permeable surface embedded in a porous medium saturated by a nanofluid is performed in this study. Numerical solutions of the similarity equations are obtained using the shooting method. Three types of metallic or nonmetallic nanoparticles, namely Copper (Cu), Alumina (Al2O3) and Titania (TiO2) are considered by usin...

Nanotechnology has wide applications in many fields, especially in the biological sciences and medicine. Nanomaterials are applied as coating materials or in treatment and diagnosis. Nanoparticles such as titania, zirconia, silver, diamonds, iron oxides, carbon nanotubes, and biodegradable polymers have been studied in diagnosis and treatment. Many of these nanoparticles may have toxic effects ...

Titania is the most widely used metal oxide for the applications of pigments, paper, solar cells and environmental purification. In order to meet the demand of a large amount of titania, our group has developed a novel process which could significantly lower the cost of waste disposal in water treatment, protect the environment and public health and yield economically valuable titania. Titanium...

Titania microspheres were synthesized using hydrothermal methods to exploit a new liquid chromatography stationary phase. The prepared titania microspheres were approximately 7 μm in diameter, and the particle size distribution was relatively narrow and uniform. Furthermore, the average specific surface area was 276.0 m2·g−1, the average pore volume was approximately 0.25 mL·g−1, and the pore d...

Hierarchical, titania-coated, nanofibrous, carbon hybrid materials were fabricated by employing natural cellulosic substances (commercial filter paper) as a scaffold and carbon precursor. Ultrathin titania films were firstly deposited by means of a surface sol-gel process to coat each nanofiber in the filter paper, and successive calcination treatment under nitrogen atmosphere yielded the titan...