Abstract Steel fibers recovered from recycled tires were considered for use as reinforcement in concrete to improve the tensile properties of well being an economically viable and environmentally friendly alternative. This paper investigates effect purified non-purified tire steel fiber with a constant proportion 30 kg m ?3 determine fresh hardened concrete. The results indicate that have bette...

an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...

In this paper, the compressive behavior of fiber-reinforced concrete with end-hooked steel fibers has been investigated through a uniaxial compression test in which the variables were concrete compressive strength, fiber volumetric ratio, and fiber aspect ratio (length to diameter). In order to minimize the effect of specimen size on fiber distribution, 48 cylinder specimens 150 mm in diameter ...

In the present study, a new method for retrofitting reinforced concrete beam is introduced in which steel-concrete composite jackets containing steel fiber is used. For this purpose, 75% of the peripheral surface of reinforced concrete beams was initially reinforced using steel plates and bolts, and steel fiber reinforced concrete was used between the steel plates and the peripheral surfaces of...

Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...

fi ber reinforced plastic (FRP) re. nforcement is one of the most promising new developments for concrete structures. FRP reinforcing elements provide lighter, easier to assemble, and more durable structures that are free of the deterioration caused by corrosion of steel. FRPs consist of synthetic or organic highstrength fibers, most of which are impregnated with a resin matrix. They are availa...

Corrosion study of conventional reinforcement in concrete has been accorded wider importance the last few decades based on losses occurring monitoring structures. It is well known that presence chloride ions one most significant factors contributing to corrosion reinforcing steel. Practically, it observed marine environment, activating substances such as chlorides penetrate steel can counteract...

This paper demonstrates the utility of a noninvasive backscatter fiber optic probe for dynamic light-scattering characterization of a microemulsion comprising sodium dodecyl sulfate/1-butanol/ brine/heptane. The fiber probe, comprising two optical fibers precisely positioned in a stainless steel body, is a miniaturized and efficient self-beating dynamic light-scattering system. Accuracy of part...

Abstract: The Quasi-static mechanical properties of hybrid fiber (steel fiber and Polyvinyl alcohol (PVA) fiber) reinforced cementitious composites (HFRCC(SP)) were investigated by compressive and tensile experiments. The compressive strength, peak strain, elastic modulus and tensile strength are studied as compared with that of engineered cementitious composite (ECC). Study results indicate th...

This experimental investigation is to study the effects of replacement of cement (by weight) with five percentage of fly ash and the effects of addition of steel fiber composite. A control mixture of proportions 1:1:49:1.79 with w/c of 0.45 was designed. Cement was replaced with five percentages (10%, 15%, 20%, 25% & 30%) of Class C fly ash. Four percentages of steel fibers (0.15%, 0.30%, 0.45%...