It is one of the future trends to create materials in situ by laser additive manufacturing. AlSi7Mg/nano-SiCp composites were successfully prepared selective melting our previous study. After adding 2 wt% nano-SiC particles, tensile stress and strain increased 502.94 ± 6.40 MPa 10.64 1.06%, respectively. For first time present study, we systematically studied compared wear performance corrosion...

Aluminum (Al)-based silicon carbide (SiC) material composites are considered as difficult-to-machine materials because of the presence hard reinforced SiC particles, which results in a greater cutting force and poor surface integrity during machining process. This paper established micro-anisotropic mechanical models SiCp/Al with 10vol% studied difference mechanism between ultrasonic elliptical...

Article history: Received 28.3.2013 Received in revised form 26.4.2013 Accepted 29.4.2013 Aluminum matrix composites containing 55% SiC particle reinforcing phase/SiC reinforcement phase particle and Kovar alloy 4J29 were chosen as the base metals. After nickel plating on the surface of SiCp/Al, two kinds of materials were soldered together by using Zn-Cd-Ag-Cu as the filler metal and ZnCl2 as ...

SiC-reinforced aluminum matrix composites (SiCp/Al composites) are typically difficult-to-machine material, and the irregular SiC diffused in SiCp/Al make surface quality worse. In this paper, a single-point cutting simulation with variable plane depth were conducted for composite higher volume fraction (65 Vol%) alloy. The morphology characteristics of composites, which mainly include breaking...

metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. however, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (sicp).in the present study, an attempt has been made to investigate the influence of spindle speed (n), feed rate...

Background Older patients with acute myeloid leukemia (AML) and myelodysplastic syndromes (MDS) experience high-intensity care (eg, chemotherapy, hospitalization, life-sustaining treatments) during the end of life. Early advance planning (ACP) may promote end-of-life that is more consistent patients’ values goals. As COVID-19 pandemic has resulted in a rapid shift to telehealth, use such method...

Microstructural and mechanical characterization of 10 vol% SiC particles (SiCp) reinforced 6061 Al-based composite fabricated by powder thixoforming (PTF) was investigated in comparison with the PTF and permanent mold cast (PMC) 6061 monolithic alloys. The results reveal that the microstructure of the PMC alloy consists of coarse and equiaxed α dendrites and interdendritic net-like eutectic pha...