In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...

The objective of this study was to evaluate the influences of enamel shape and bracket base configuration on shear bond strength from a biomechanical point of view. To this end, shear bond test and stress analysis using finite element method (FEM) were performed. Results obtained from both tests were then comprehensively investigated. Maxillary incisors were prepared for plane specimens, while ...

This study examines the relationship between shear force and horizontal relative displacement of Lshape shear connector by means of beam type test method. An equation for maximum shear force of the specimen which takes into account the effects of size of the shear connector and the concrete strength was proposed. It was found that shear force-horizontal relative displacement relationship can be...

The shear strength of a 4-ply unidirectional composite laminate consisting of carbon fibers (T650-35) and a polyimide matrix (HFPE-II-52) was measured over a temperature range of 25 to 315C. The tests were performed using a Iosipescu test sample, modified to provide a more uniform shear stress distribution across the gauge section and loaded with an Arcan type test fixture. The test specimen de...

bonding brackets to the enamel surface has gained much popularity today. new adhesive systems have been introduced and marketed and a considerable increase in research regarding bond strength has been published. a considerable amount of these studies deal with shear bond strength of adhesives designed for orthodontic purpose. previous studies have used variety of test designs. this diversity in...

This investigation was aimed at studying the effect of test methods on bond strength between concrete substrate and repair material. Four test methods with cementations or modified-cementations repair materials, and two surface roughnesses were studied. The methods used were pull-off, slant shear, splitting prism and a new direct shear named Bi-Surface shear test. While the coefficient of varia...

in this study, the effects of forming method (extrusion) and environmental factors (solution ph and temperature) on the corrosion performance of az91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (eis), scanning electron microscopy (sem) and salt spray techniques. the polarization test results of the specimens showed that simple sh...

One of the most common methods to measure soil mechanical properties (namely cohesion and internal friction angle) is direct shear box test. In this paper the development of a three-dimensional (3D) discrete element soil model for simulation of a cohesive soil’s direct shear test is presented. The aim was to calibrate the properties of the Hertz-Mindlin with bonding contact model available in E...