Before being processed into composites, reinforcement fabrics may undergo repeated involuntary deformation, the complete sequence of which is here referred to as specimen history. To mimic its effect, fabric specimens were subjected to sequences of defined shear operations. For single fabric layers with unconstrained thickness, quantitative evaluation of photographic image data indicated that r...

In this study, polyester matrix composites reinforced by 1x1, 2x2, half- and full-cardigan rib pattern weft-knitted fabrics from glass glass/aramid hybrid yarns were produced. Tensile, flexural impact tests applied to the composites. The 2x2 composite showed highest thickness density. hybridization of yarn with aramid increased thickness, while it decreased density tensile modulus strength. Yar...

To realize 3-D simulation of warp-knitted fabrics, this paper proposes a 3-D loop modeling method based on Cardinal spline and recursive rotation frame method. Fabric structure and loop geometry are studied to form a visible lapping detection model and loop geometrical key points obtained according to chain links and yarn arrangements. In this paper, eight points are set for stitched loop and t...

INTRODUCTION Today, development of materials technology using biomass is expected for creation of a sustainable society. Especially, the composite consisting of plant-based natural fibers and biodegradable resin, so-called the fully-green composites, is much expected for practical use. So far, we made textile green composites using biodegradable resin and plain woven ramie fabric and explored t...

Damping is a critical phenomenon in determining the dynamic behavior of animated objects. For yarn-level cloth models, setting the correct damping behavior is particularly complicated, because common damping models in computer graphics do not account for the mixed Eulerian-Lagrangian discretization of efficient yarn-level models. In this paper, we show how to derive a damping model for yarn-lev...

We present and characterize cotton yarn and knots as building blocks for making microfluidic circuits from the bottom up. The yarn used is made up of 200–300 fibres, each with a lumen. Liquid applied at the extremity of the yarn spontaneously wets the yarn, and the wetted length increases linearly over time in untreated yarn, but progresses according to a square root relationship as described b...

We report mechanically robust, electrically conductive, free-standing, and transparent hybrid nanomembranes made of densified carbon nanotube sheets that were coated with poly(3,4-ethylenedioxythiophene) using vapor phase polymerization and their performance as supercapacitors. The hybrid nanomembranes with thickness of ~66 nm and low areal density of ~15 μg/cm(2)exhibited high mechanical stren...

This paper presents the main characteristics and functionalities of a system based on image processing techniques applied to quality assessment of yarns. In Textile Industry we used image processing to determine yarn mass parameters as well as yarn production characteristics. A low cost solution based on a web-pc camera plus the optics of a low cost analogue microscope and a software tool based...

Carbon nano tube (CNT) yarn is an axially aligned CNT assembly. It has great potential many applications. In this study, the mechanical and electrical properties of the aerogel-spun CNT yarns and CNT/Polydimethylsiloxane (PDMS) composite yarns were investigated. The CNT/PDMS yarn was fabricated by droplet infiltration of PDMS solution into the aerogel-spun CNT yarn. The mechanical properties of...

Air-jet weaving is an advanced weaving method with high efficiency and productivity. It is one of the most widely used methods of weaving in the world. In air-jet filling insertion, the motion of weft yarn is caused by friction between weft yarn and air blown through nozzle. After declamping and subjecting the yarn to air stream, its motion is not active but very complicated and influenced by ...