We compared three different tracheal wall pressure measuring techniques in vitro. Using a high-volume, low-pressure, cuffed tracheal tube with an internal diameter of 7.5 mm and a model trachea, the pressure difference technique, the wall pressure membrane technique and the microchip sensor probe technique with and without lubrication were studied. Wall pressures were measured after sequential ...

This work demonstrates a highly sensitive pressure sensor that was fabricated using carbon microcoils (CMCs) and polydimethylsiloxane (PDMS). CMCs were grown by chemical vapor deposition using various ratios of Fe-Sn catalytic solution. The pressure sensor has a sandwiched structure, in which the as-grown CMCs were inserted between two PDMS layers. The pressure sensor exhibits piezo-resistivity...

Flexible Capacitive Pressure Sensor with Microstructure Array for Human Pulse Sensing 1. Abstract In this project, we designed a capacitive pressure sensor for blood pressure and human pulse detection using flexible copper film and PDMS [dielectric] microstructure sandwich structure. We observed a linear relation between force and change in capacitance and detected a human pulse [pressure]. Thi...

This paper presents a high sensitive micro-sensor designed for pressure measurements in a wide range around atmospheric pressure, for application in aerodynamics. The sensor is a temperature-resistance transducer operating with the Pirani effect, which states that below a certain pressure limit, the thermal conductivity of a gas is pressure-dependent. The sensor presents a wide measurement rang...

A novel resonant pressure sensor with an improved micromechanical double-ended tuning fork resonator packaged in dry air at atmospheric pressure is presented. The resonator is electrostatically driven and capacitively detected, and the sensor is designed to realize a low cost resonant pressure sensor with medium accuracy. Various damping mechanisms in a resonator that is vibrating at atmospheri...

Pressure vessels are widely used in industrial fields, and some of them are safety-critical components in the system-for example, those which contain flammable or explosive material. Therefore, the pressure of these vessels becomes one of the critical measurements for operational management. In the paper, we introduce a new approach to the design of non-intrusive pressure sensors, based on ultr...

Because of the limitations of existing methods and techniques for directly obtaining real-time blood data, no accurate microflow in vivo real-time analysis method exists. To establish a novel technical platform for real-time in vivo detection and to analyze average blood pressure and other blood flow parameters, a small, accurate, flexible, and nontoxic Fabry-Perot fiber sensor was designed. Th...

A novel structure of the resonant pressure sensor is presented in this paper, which tactfully employs intercoupling between dual pressure-sensing diaphragms and a laterally driven resonant strain gauge. After the resonant pressure sensor principle is introduced, the coupling mechanism of the diaphragms and resonator is analyzed and the frequency equation of the resonator based on the triangle g...

In response to the growing demand for in situ measurement of pressure in high-temperature environments, a high temperature capacitive pressure sensor is presented in this paper. A high-temperature ceramic material-alumina is used for the fabrication of the sensor, and the prototype sensor consists of an inductance, a variable capacitance, and a sealed cavity integrated in the alumina ceramic su...

A wireless passive pressure measurement system for an 800 °C high-temperature environment is proposed and the impedance variation caused by the mutual coupling between a read antenna and a LC resonant sensor is analyzed. The system consists of a ceramic-based LC resonant sensor, a readout device for impedance phase interrogation, heat insulating material, and a composite temperature-pressure te...