This paper reviews research carried out towards the development of a novel conductive coating for reinforced concrete structures in order to enable the application of electrochemical anti-corrosion treatments. The coating is composed of a hardened paste containing graphite powder and cement. The applied techniques were electrochemical chloride extraction (ECE), cathodic protection (CP), and cat...

High-density metals such as hafnium and zirconium are of interest to the propellant, explosive, and pyrotechnic industry due to their high oxidation enthalpies; however, these metal fuels suffer from electrostatic discharge (ESD) complications creating safety concerns. Previous attempts to passivate these powders have failed due to abrasion of the protective coatings. Two novel methods for dese...

The U.S. Automotive industry is struggling with the adoption of a solvent-free powder coating technology as a replacement for traditional liquid painting technology which is considered to be environmentally harmful. The Low Emission Paint Consortium (LEPC) was formed by Chrysler, Ford, and General Motors to tackle many of the technical issues that are associated with bringing a new technology i...

Using Electrostatic Spray Coating Technique, Polypropylene Powder (EPD 60R) was applied on carbon steel substrates at room temperature. In order to obtain a uniform coating, steel substrates with powder coatings were heated in a vacuum oven at various temperatures up to 250° C for various periods of time up to 45 min and a pressure of 200 mb. The coatings produced had thicknesses of around 470 ...

In the cold-spray process, metal powder particles develop into a coating as a result of ballistic impingment on a substrate. In cold-spray, compressed gas (air, nitrogen or helium), at pressures ranging between 1.4– 3.4 MPa (200–500 psi), but typically around 1.7 MPa (250 psi), flows through a manifold system containing a gas heater and a powder feeder. The pressurized gas is heated electricall...

This work describes the development of spray dried polymer coated liposomes composed of soy phosphatidylcholine (SPC) and phospholipid dimyristoyl phosphatidylglycerol (DMPG) coated with alginate, chitosan or trimethyl chitosan (TMC), that are able to penetrate through the nasal mucosa and offer enhanced penetration over uncoated liposomes when delivered as a dry powder. All the liposome formul...

A waterborne ultraviolet (UV)-curing coating was prepared on the surface of wood materials with modification of talcum powder and calcium carbonate (CaCO3). When the waterborne UV-curing coatings on the surface of wood materials (WUVCW) was radiated for 1 min by UV (λ = 365 nm) and dried at 40 ◦C for 10 min, it showed good hardness, adhesion, and impact strength, with controlling the talcum con...

The electroless coating technique is one of the elegant methods available for the production of protective coatings on surface. Our study has been aimed at the conditions of the electroless deposition of copper coating onto the iron powder particles from sulphate electrolyte. The course of the electroless process depends on the composition and pH of the electrolyte as well as on the size and co...

The main objective of this study was to prepare sustained release metformin hydrochloride microcapsules by the Wurster fluidized bed and to obtain the optimized coating process and formulation. Fine microcapsules without agglomeration were obtained in a continuous coating process with the atomization air pressure of 0.2Mpa and an appropriate coating speed temperature. With other design variable...