Attempts were made to modify polypropylene fibers by melt blending with polyethylene terephthalate in order to enhance the dyeability of the resultant fiber. Five blends of polypropylene/polyethylene terephthalate/compatibilizer were prepared and subsequently spun into fibers. Three disperse dyes were used to dye such modified fibers at boiling and 130 °C. The dyeing performance of the blend fi...

Mortars containing carbon, polyethylene, and stainless steel fibers at the same volume fraction and with similar fiber diameters were compared in terms of tensile, compressive, and flexural properties. Carbon fibers, though having the lowest tensile modulus, stren[?th, and elongation at break among the fiber types, [?ave mortar of the highest tensile strenf?th and lowest cost; polyethylene fibe...

PURPOSE The aim of this in-vitro investigation was to describe the effect of reinforcement with different fibers on impact strength of heat polymerized polymethyl methacrylate (PMMA) denture base resin and to analyze the effect of surface treatment of the fibers on the impact strength. MATERIALS AND METHODS The specimens were fabricated from the dies formed as per standard ASTM D4812. 2% by w...

Blends based on recycled high density polyethylene (R-HDPE) and recycled poly(ethylene terephthalate) (R-PET) were made through reactive extrusion. The effects of maleated polyethylene (PE-g-MA), triblock copolymer of styrene and ethylene/butylene (SEBS), and 4,40-methylenedi(phenyl isocyanate) (MDI) on blend properties were studied. The 2% PE-g-MA improved the compatibility of R-HDPE and R-PET...

The interest in recycled carbon fiber (rCF) is growing rapidly and the supply chain for these materials gradually being established. However, processing routes, material intermediates properties of rCF composites are less understood designers to adopt them into practice. This paper provides a practical pathway rCFs conjunction with low cost and, most part, commodity thermoplastic resins, namely...

In this study, dyeing of two regenerated polyester fibers, poly-trimethylene terephthalate (PTT) and poly-lactic acid (PLA), with natural dyes were compared with that of poly-ethylene terephthalate (PET) fiber. Lac was used as the primary natural colorant while Catechu was chosen as a natural color that can also act as a biomordant. The effects of temperature, initial pH of dye bath and dyeing ...