A large amount of cotton stalk waste biomass with high cellulose content are incinerated by the farmers causing air pollution. The high cellulose content of cotton stalks can be converted to fermentable sugars by fungal delignification pretreatment of lignocellulosic biomass and enzymatic saccharification. The effect of particle size, moisture content, and media supplements was studied for deli...

Structural modification of eucalypt pulp lignin was investigated in a totally chlorine-free (TCF) bleaching sequence including a laccase-mediator stage. This stage was applied after two oxygen delignification stages, and was followed by an alkaline peroxide stage. After two oxygen delignification stages, two more stages with a laccase mediator and alkaline peroxide were applied. The residual li...

To assess the feasibility of implementing hemicellulose recovery stages in kraft mills, Eucalyptus globulus wood samples were subjected to aqueous treatments with hot, compressed water (autohydrolysis processing) to achieve partial dissolution of xylan. Autohydrolyzed solids were subjected to kraft pulping under selected conditions to yield a pulp of low kappa number, and to an optimized TCF bl...

Kraft pulping is the dominant process currently used to produce chemical pulps, and has been applied for more than 130 years. A large number of studies have been conducted to gain a better understanding of the delignification kinetics as well as the reactions of the wood components being dissolved during the cooking process. Nevertheless, these remain far from being well understood in detail du...

A pulp yield increase up to 2% can be achieved by impregnation with a liquor containing 2 M effective alkali (EA) concentration instead of 1 M. The yield increase is due to higher cellulose and glucomannan contents in the pulp, which can be rationalized by less yield loss by peeling, as impregnation is more effective at an elevated EA level. A rapid loading of chips with alkali can be realized...

Wheat straw is the major crop residue in European countries which makes it the most promising material for bioconversion into biofuels. However, cellulose and hemicellulose are protected with lignin, so delignification is an inevitable phase in lignocellulose processing. The organisms predominantly responsible for its degradation are white-rot fungi and among them Trametes species represent pro...

BACKGROUND Lignin is an integral component of the plant cell wall matrix but impedes the conversion of biomass into biofuels. The plasticity of lignin biosynthesis should permit the inclusion of new compatible phenolic monomers such as flavonoids into cell wall lignins that are consequently less recalcitrant to biomass processing. In the present study, epigallocatechin gallate (EGCG) was evalua...

It has been found that polyoxometalates (POMs) can act as mediators in the electrochemical oxidation of lignin in pulps. An electrochemical cell, with a Nafion membrane separating the anode and cathode compartments, was used in the delignification experiments. A softwood kraft pulp was placed in the anode compartment with a buffered 0.01M solution of the polyoxometalate Na5[SiVW11O40]. During e...