Post-manufacturing thermal treatments are commonly employed in the production of hip replacements to reduce shrinkage voids which can occur in cast components. Several studies have investigated the consequences of these treatments upon the alloy microstructure and tribological properties but none have determined if there are any biological ramifications. In this study the adsorption of proteins...

Clay minerals are widespread in natural systems and have been widely used for the removal of pollutants. In this study, natural expanded vermiculite was used in adsorption tests to remove ammonium nitrogen from landfill leachate. The modification of vermiculite was carried out using NaOH and HCl, and for both modifications the best concentration was 0.1 mol/L. The results produced by XRD (X-ray...

Removal of Pb 2+ from aqueous solutions using coconut shell carbons produced by KOH activation is performed in this paper. Morphology and pore structure characteristic of coconut shell carbons are analyzed by SEM and nitrogen adsorption techniques. Effects of adsorbent concentration, agitation time and initial ion concentration on the adsorption behavior are investigated, and adsorption isother...

The adsorption capacity and selectivity of carbon dioxide and nitrogen at 298 K have been evaluated for two series of MMOFs built on metal paddle-wheel building units, including non-interpenetrated Zn(BDC)(TED)(0.5) (1), Zn(BDC-OH)(TED)(0.5) (2), Zn(BDC-NH(2))(TED)(0.5) (3), and interpenetrated Zn(BDC)(BPY)(0.5) (4), Zn(BDC)(DMBPY)(0.5) (5), Zn(NDC)(BPY)(0.5) (6) and Zn(NDC)(DMBPY)(0.5) (7) fra...

A novel composite adsorbent, Silica aerogel activated carbon was synthesized by sol-gel process atambient pressure drying method. The composite was characterized by Fourier transform infraredspectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry(DSC) and Nitrogen adsorption / desorption isotherms (BET).In the present study, the mentioned adsorbent was used m...

\ INTRODUCTION Utilization of adsorption on solid surfaces was exercised for the first time in 1785. Practical application of unactivated carbon filters, and powdered carbon were first demonstrated in the American water treatment plant, and a municipal treatment plant in New Jersey, in 1883 and 1930, respectively. The use of activated carbon became widespread in the next few decades. At present...

Nitrogen-doped ordered mesoporous carbon was synthesized by using polyaniline as the carbon source and SBA-15 as the template. The microstructure, composition and electrochemical behavior were extensively investigated by the nitrogen sorption isotherm, X-ray photoelectron spectroscopy, cyclic voltammetry and rotating ring-disk electrode. It is found that the pyrolysis temperature yielded a cons...

Polyaniline titanotungstate (PATiW) was synthesized by the sol-gel method. Adsorption isotherm studies of Cs from aqueous solution are described. Elemental Composition, chemical solubility, ion-exchange capacity (IEC) and pH titration are studied. Distribution coefficients (Kd) for ten metal ions have been determined. It was found that the polyaniline titanotungstate has high affinity and high ...

A metal-organic truncated octahedron (termed MOP-28) has been constructed from six rigid square-shaped Cu2(CO2)4 paddle-wheel building units and twelve 2,2':5',2' '-terthiophene-5,5' '-dicarboxylate (TTDC) linkers. TTDC linker in the cis,cis conformation provides the critical 90 degrees linkage for this unique construction. The porous structure of MOP-28 is maintained even after the removal of ...

The adsorption behavior of a model additive, hexadecylamine, onto an iron surface from hexadecane oil has been characterized using polarized neutron reflectometry, sum-frequency generation spectroscopy, solution depletion isotherm, and X-ray photoelectron spectroscopy (XPS). The amine showed a strong affinity for the metal surface, forming a dense monolayer at relatively low concentrations; a l...