Development of nanometer-sized magnetic particles exhibiting a large coercive field (Hc) is in high demand for densification of magnetic recording. Herein, we report a single-nanosize (i.e., less than ten nanometers across) hard magnetic ferrite. This magnetic ferrite is composed of ε-Fe2O3, with a sufficiently high Hc value for magnetic recording systems and a remarkably high magnetic anisotro...

Magnetic nanoparticles of cobalt ferrite (CoFe204) have been synthesized using water-in-oil microemulsions consisting of water, cetyl trimethyl ammonium bromide (surfactant), n-butanol (cosurfactant), and n-octane (oil). Precursor hydroxides were precipitated in the aqueous cores of water-in-oil microemulsions and these were then separated and calcined to give the magnetic oxide. X-ray diffract...

Polyaniline-NiFe2O4 nanocomposites (PANI-NiFe2O4) with different contents of NiFe2O4 (2.5, 5 and 50 wt%) were prepared via in situ chemical oxidation polymerization, while the nanoparticles nickel ferrite were synthesized by sol-gel method. The prepared samples were characterized using some techniques such as Fourier transforms infrared (FTIR), X-ray diffraction (XRD), scanning electron microsc...

magnetic cufe2o4 nanoparticles were synthesized by a facile microwave-assisted reaction between cu(no3)2 and fe(no3)3. the magnetic nanoparticles were added to starch to make magnetic polymeric nanocomposite. the nanoparticles and nanocomposites were characterized using x-ray diffraction and scanning electron microscopy. the magnetic properties of the samples were investigated using an alternat...

The atomic level structure of a series of monodisperse single crystalline nanoparticles with a magnetic core of manganese ferrite was studied using X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) techniques at both the Fe and Mn K-edges, and conventional and high resolution transmission electron microscopy (TEM and HRTEM). In particular, insights on the ...

Cobalt ferrite nanoparticles were synthesized with coprecipitation or with the hydrothermal method. Stable water suspensions were prepared from the as-synthesized nanoparticles, with the addition of citric acid as a surfactant, and then used for the preparation of deposits under an applied magnetic field. The morphology of the cobalt ferrite nanoparticles was investigated with a transmission el...

In the present study, new multi-components spinel ferrite Zinc doped metallic ferrites are investigated. The synthesized compounds consisting of Zinc copper ferrite nanostructures were developed using the Co-precipitation technique. Powder X-ray diffraction pattern (XRD) confirms the formation of the spinel phase for all the samples. The lattice constant was studied through powder X-ray diffrac...

Metallic nanoparticles have been increasingly suggested as prospective therapeutic nanoplatforms, yet their long-term fate and cellular processing in the body is poorly understood. Here we examined the role of an endogenous iron storage protein - namely the ferritin - in the remediation of biodegradable cobalt ferrite magnetic nanoparticles. Structural and elemental analysis of ferritins close ...

   The aim of the present investigation is to synthesize Barium ferrite and Nickel ferrite Nanoparticles by co-precipitation method and these nanoparticles are used to prepare nanocomposites with poly vinyl alcohol (PVA). The composited nanoparticles are characterized by using FTIR, XRD and SEM. The synthesized nanoparticles are used as adsorbent to remove the heavy metals such as Cu2+...

In this work, the effects of co-precipitation temperature and post calcination on the magnetic properties and photocatalytic activities of ZnFe2O4 nanoparticles were investigated. The structure, magnetic and optical properties of zinc ferrite nanoparticles were characterized by X-ray diffraction (XRD), vibrating sample magnetometry and UV–Vis spectrophotometry techniques.  The XRD re...